Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Planer

Posts

Planer

#1

Planer

"RJ" Whelan

>Well I have once again worn out a planer - probably has something to do with using machines designed for a home shop environment in a commercial application.

My last two machines were both by Delta: the first one a 12" sniper which lasted six years; the most recent a 13" two speed machine that barely made four years.

The machine I'm considering is a Dewalt DW735 - yeah, I know, I should probably buy a more commercial tool but I just can't afford it right now, and I need something.

Does anyone have anything to say about this machine; good or bad? Should I get the accessory tables that go with it (I'd rather not unless they offer some dramatic performance difference)?

Thanks, in advance, for any guidance or words of advice.

BTW - my budget is $500-600 (including freight) so if you have another (non-Delta) suggestion I'd like to hear it.

All the best ... rj

Re: Planer

#2

Re: Planer

Kelly Anderson

>I have the DW735 and love it. It gives a great surface on both speeds. I have the tables but used it for 2 years without them and never had a problem and do not notice any great improvement with them but they do make the table bigger.

Re: Planer

#3

JL

Re: Planer

JL

>I have the DW735 with the tables. I tried it w/o them and got a little too much snipe. It is a PITA to store it on the shelf as the back table doesn't fold up due to the cord winder and the back sticking out more than the front. The front table folds up fine.

I've had mine for a few years. It works great in both speeds. To tell the truth, I hardly ever use the finishing speed.

Re: Planer

#4

non delta sugestion

Robin Corell in Atascadero CA

>I have used a 12" parks in two diferent production shops. I don't know when the went out of producion, mid 80's I think. They were also badged and sold as craftsman for a while in the early 50's and I think they may have been sold in Canada under a diferent name.

These machines are not light weight they weigh nearly 300 lbs without a motor. a used parks is within your price range if you can find one reasonably close to you.

You can find oput more about Parks planers at OWWM.com

Robin Corell

Re: Planer

#5

Look who's talking...!

HC Sakman

>Hi RJ!

How the hell are you? You must be busy making furniture since you wore out your 3rd. planer!

My only suggestion is Makita. It's quiet (really) very precise and blades (double edge) last a long time. (Very high quality steel)

DW 735 is also producing great-to-excellent results, though it's unbearably noisy... at least to me.

Take care and show up little more frequently, will ya?

Chico...

Re: Planer

#6

Re: Planer

Tony - Memphis

>I've had the 735 for a while now. I've been real happy with it. To qualify, I don't use it real often. I get really nice surfaces on everything I have put through it. I have tried some figured wood and had good luck with that as well. I have the extensions, so I can't say one way or the other. It's heavy! I could lug my old Delta around with just a little grunting - not this one!

Tony

Re: Planer

#7

Re: Planer *LINK*

billding

>I started out with a Delta 12" sniper. Upgraded to a 12 1/2" 560 when they came out. Used it faithfully, went thru several sets of knives, replaced brushes twice. Lately it started to get tired. About a month ago I replaced it with a DW735. Oh, my! I didn't know what I was missing. It is NOT as noisy as the 560. The blower in the dust chute is great. When connected to my cyclone, I don't notice a chip on the floor. Did I say that the DW735 does NOT make as much noise as the 560. The finish is glass smooth. I compare it to 320 grit coming out of my drum sander. You'll need the extension tables DW7351 ($40 from Amazon). Without them, I noticed a small amount of snipe. I'm keeping my 560 to skip plane rough stock to get rid of all the dirt, etc. I've read that knives don't last long. A friend replaced his with HSS German ones from Infinity Tools ($60). DeWalt still has a $60 cash rebate on the 735. You'll not make a bad decision by choosing the 735.


http://www.dewalt.com/DWAssets/english/pdf/rebates/2007Q1/woodworkingPromotion.pdf

Re: Planer

#8

Re: Planer

Charles Sharp

>Let me start of by saying "I'm cheap". That being said, check out Craig�s List, Ebay, etc. and see what's around.

I purchased an old 6" cast iron Central Machinery jointer for $50 on Ebay, works like a champ.

I also picked up an old Craftsman planer for $75 off of Craig�s List, but it needs a new set of knives. It's a 12 1/2" lunch box however it weighs around 70 lbs.

I picked up a Delta scroll saw off of Craig�s List also for $30. I've never used it, but I'm a sucker for a deal.

Re: Planer

#9

Re: Another option

Glenn Madsen near San Francisco

>I build stuff for fun, but use my power tools pretty hard at times. We did a bunch of old redwood Saturday with my Ridgid TP1300 that I bought 4 or 5 years ago. Filled three DC bags with redwood shavings, and the boards were gorgeous. My eldest son will be building a long board for his surfing habit.

The Ridgid seems like a whole lot of machine for the money. Yes, it's BORG, but it's well made, comes with a stand and spare blades, and leaves $200 in your pocket for other stuff. Mine has withstood stupidity (mine), Boy Scouts and rough wood. The supposedly non-resharpenable blades get touched up with 600 grit sandpaper wrapped on a block of maple, and go back to work. I've got three double sided sets, and haven't spent on new ones in four years.

Unless you're willing to go to a 300lb cast iron beast, I'd look at one of these.

Re: Planer

#10

Hi Skip. Good To Read Your Name Again!

George@Colonel's Workshop-Havertown PA

>

Re: Planer

#11

Re: Planer

Jim Shaver - Oakville, Ontario

>I knew a guy once with a name just like yours!!

:-)

Great to see you pop up..

I hear good things about the Ridgid. I had a Delta 560 for a few years as well, liked it fine till I went to 220v.

Take care,

Jim

Re: Planer

#12

Ridgid TP1300 Re: Another option

del schisler

>i have the Ridgid TP1300 And use it most every day For the money a good machine Good warrenty also

Re: Planer

#13

Thanks for all of the responses

"RJ" Whelan

>I'll probably go with the Dewalt w/o extension tables (I can live with a little snipe - and the smaller size will fit into my current shop layout a lot better).

Hopefully this machine will be the last one I have to buy. Five more years doing commercial work and woodworking will go back to hobby status and if I kill another planer I'll just use hand planes and live with the extra time it take. Truth be told, I could almost manage that now, but my 60 year old elbows and shoulders have to last me until I go to the big cabinet shop in heaven (I hope that'll be my final stop).

All the best to everyone .... rj (skip)