Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

OT Samsung Printer

Posts

OT Samsung Printer

#1

OT Samsung Printer

Robert R Clough - Thorncraft

>In November, 2005, we purchased a Samsung SCX - 4100. This is a printer/copier/scanner. Until fairly recently it has worked reasonably well. However, for about the last 3 or 4 months paper has been more and more "crinkled" at the top left. Then jams became more common. Now I must only use the open back as an exit. Trying to use the fron collated exit results in massive jams which I must remove by taking part of the machine apart. The problem is the final rollers/wheels at the back end.

I have a feeling this is not fixable. The model was a discontinued one when we purchased it at Compusa. I have a feeling that this may be one of the reasons it was discontinued.

I think we shall look around for another machine. I'd prefer a Hewlett-Packard. We had one just prior to the Samsung that was about 15 yrs old when it died.

What think you?

Re: OT Samsung Printer

#2

After two set of ink

Dustmaker Mike

>cartridges you can safely replace most printers. Ok really it sounds like the feed rollers are dirty or a spring is not working correctly.It may just need a good cleaning, and pay attention to the side that is haveing problems and see if a little plastic thingy is causeing your problem.

At the cost of a new printer it may be worth just useing it as a light box, and buying a new one. I like HP, Cannon, Epson and Lexmark is catching up. Just think it is Sunday afternoon you have something you want to print and the ink is dry, how close is a refill or new one?

Re: OT Samsung Printer

#3

Re: OT Samsung Printer

Ray SW Ohio

>Had one at work, just did a good cleaning and it works fine. Nest time you have it apart, clean it. Good luck.

Re: OT Samsung Printer

#4

Re: OT Samsung Printer

Curly Smith

>I agree with the previous posts about the printer rollers needing cleaning. However, if you've changed paper brands recently then you might want to go back to the old stuff.

If you do need to replace the unit I'd suggest buying a good stand-alone laser printer instead. I've found that the MFDs really aren't very reliable and they don't really do anything well.

Re: OT Samsung Printer

#5

Re: OT Samsung Printer

Lee Brubaker

>You may be able to salvage it as per previous posts but I quit buying Samsung products about 5 years ago after a fiasco with a rather expensive bread machine. It was a fancy sucker & you were supposed to be able to bake a wide variety of breads. Well it seems a piece of rye bread dough caught under the beater & burned out a fusible link. Guess where Samsung engineers sited the fusible link? Why within the motor windings instead of a simple link leading to, & external to the motor. The result either rewind the motor or buy a new motor....both options about the same price. Samsung not too interested in the problem. That bread maker hit the junk pile pronto & as a result no more Samsung in my home...ever.

Lee