I cavilled on this one a long time, and noticed some reviews that were less than glowing, so I'd thought that the bloom was off that rose.
But with a bank of drawers to install, and Lowe's offering a nice discount, I decided to try it, and I'm glad I did. It is especially helpful in tight quarters, and has both good power and easy controlability.
Still, nothing I own or know of is real good when you're 15" deep in a carcase, with only 4" of vertical clearance. Next time, I'm going to build the drawers first, then build the carcase around them.
Oh, lemme mention the LV drawer slides, too. They are far better than the other brands I've installed, and I'm glad I tried them.
>Yes. The 20 is very conventional, just much smaller than most. In spite of its small size, it is quite powerful, and works like a typical driver. Its light, critisized by some, is helpful to me, BTW.
The PS10 shares batteries with the 20. Other than that, it's a completely different beast. The torque settings offer a smaller range, and when you hit the torque limit, the motor shuts off. Period. It doesn't chatter while the clutch slips. That's surprsing, at first, but no problem. Actually good when you are at arm's length and straining to keep the bit in the screw slot.
The 10's battery hook, or whatever that is, does not latch tightly, and gets in the way a little. But the battery remains solidly in place, so maybe I just don't understand what that wire bail is for. Not a problem.
The 20 is general use, and neat. The 10 is great for tight, narrow spots. At this point, the two seem like a winning combination, sharing batteries and offering significant power, run time and light weight.
But, just to muddy the water, I also like the DeWalt 7.2 driver, and I've had it for over 3 years.
Word for embarrassed is "avergonzado" - I had to look it up as it never came up a whole lot at the drill rig- but I do remember making the embarazada mistake once, much to everyone's amusement ;)
>Though I have done some panning. We used to go on panning field trips when I was in college -- never found enough gold to help with the tuition.
Most exploration these days is done with geochemical sampling followed by either core or reverse circulation drilling. One surveyor I used to work for was always trying to invent a panning machine using old washing machine parts.