Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

What would you put your $ on?

Posts

What would you put your $ on?

#1

What would you put your $ on?

Sawdust Maker

>Hi all, I am considering some new pneumatic nailers and was wondering if you guys could help me make the decisions more easily.

Offer 1 ($165 - Set of 3 tools)

Senco FinishPro 35 (15 gauge angle nailer)

Senco FinishPro 15 (18 gauge brad 1 1/4" nailer)

Senco SLP 15 (18 G narrow crown stapler)

Offer 2 ($180 package deal from rockler)

Porter Cable DA250B (15 gauge angle nailer)

BN125A (18 gauge brad 1 1/4" nailer)

Just wondering if you had the $ to get either set, which would you? Does anyone have any aprehensions about the senco nailer? The FP35 is a lower end 15G angle nailer with only 1 yr warranty compared to their tried and tested FP41XP which carries 2 year wannanty.

The Senco seems like a better value for $ with an additional stapler thrown in, but I don't know about the quality of the nailers. They seem a little more cheap to me compared to the PC. I don't really need the stapler, but will be useful if I ever need it. I think I would be more inclined to go with quality rather than value. Which is the bettr built gun? What do you recomend?

Recomendations sought,

TIA, Julian

Re: What would you put your $ on?

#2

Re: What I would My $ on

Mark Mandell - Gone Round In Jersey

>Have to say "not" to your packages.

Instead, I would (again) buy the Senco FP-25 (2" brad) and the Bostich N62FNK (15 ga finish).

A. They've both got power to spare for driving into anything.

B. They're both oil free.

C. I haven't had a single jamb on either of them in 5 years' use.

I'd beware of "bundle" deals because I've rarely seen one where the marketer is not throwing in a lame dog to clear out inventory.

mm

Re: What would you put your $ on?

#3

Re: What would you put your $ on?

Glenn Madsen near San Francisco

>I've used my Porter Cable nailers pretty lightly over the last 5 years or so, but they hold up to ignorance pretty well. ;)

The 18 ga brad nailer is just fine. Two sizes are in my shop. I use the narrow crown stapler fairly seldom. The 16 ga finish nailer, not angled, is one of my new favorites for cabinets, molding, trim, etc. I haven't convinced myself to buy the pin nailer or the upholstry stapler yet. I bought a package with the incredibly loud PC compressor. And I wear ear muffs.

PC products are pretty good tools, and those will serve you well. If you need some quick & dirty tools, see Harbor Fright. The cheap brad nailers have a pretty good reputation, and run less than $25, usually.

Re: What would you put your $ on?

#4

Re: What I would My $ on

Del Williams

>Have to agree with Mark. Both the Bostich and Senco are quality tools. I have had no problems with either. The Bostich has good power and an excellent range of fastners.

Re: What would you put your $ on?

#5

Re: What would you put your $ on?

Keith Weber

>I have a Senco Finish Pro 25 (18ga) and a Senco 41XP (15ga). They are both awesome tools and have never let me down. They are also both oil-free, which is a nice feature. I would recommend them in a heartbeat. I think that the Sencos in your package are the low-end Senco nailers. I got a free Finish Pro 15 with my 41XP, but it leaked air, so I took it to a dealer. He never called me back. That was over 2 years ago. I kind of forgot about it. It seemed like it was underpowered and cheap anyway, so I'm not missing it.

Keith

Re: What would you put your $ on?

#6

Re: What would you put your $ on?

Sawdust Maker

>Thanks for yout imput guys. I think I'll go for the PC.

Seems to be a winner compared to the lower end senco products

Re: What would you put your $ on?

#7

Use Rules

Mark Mandell - Gone Round In Jersey

>You'll come to appreciate the oil free guns if you make furniture. For general finish work, the PC's are Okay unless you're working with very hard stock or engineered products.

mm