Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Bandsaw purchase suggestions

Posts

Bandsaw purchase suggestions

#1

Bandsaw purchase suggestions

John Foster

>I am sure this question has been asked many times, but what bandsaw should I be looking at? I am a home handyman who works with both hard and soft woods. I don't use my tools alot, but when I buy one I am planning on owning it for the long term. I am interested in a 14" machine, so the choices seem to me to be Delta ( now imported) or one of the many Delta copies made offshore. Should I look at a used machine? Possibly an older Delta or a General? Thanks for suggestions, John

Re: Bandsaw purchase suggestions

#2

Re: Bandsaw purchase suggestions

Howard Norman-Prescott, AZ

>By all means look for a used bandsaw, especially a good well known brand. I have a Delta 14" that I have had for about 10 years now. It is a good machine. I ought mine new. I would like to have a larger machine but that is not in the cards because of lack of money.

Howard

Re: Bandsaw purchase suggestions

#3

Re: Bandsaw purchase suggestions

mike from American Sycamore

>John:

I do the Master Clinics for Delta at The Woodworking Shows amd just about every week-end I am using a new made in the USA 14" Delta Bandsaw. You are correct in that Delta does have a lower priced machine made over seas, but I am happy to report that they still make the best 14" bandsaw right here in America. I have sold power tools for over 25 years and have sold many brands. You will enjoy the quality of the Delta USA bandsaw. It has been my experience that this unit will serve most woodworkers more tha a life time.

Good luck:

BUILD WITH CONFIDENCE

Mike

Re: Bandsaw purchase suggestions

#4

Re: Bandsaw purchase suggestions

Frank Orfanello

>Mike,

Do you know the model # of the model that is made in the USA?

Re: Bandsaw purchase suggestions

#5

Re: Bandsaw purchase suggestions

Larry in NW Ohio

>Go to woodworkers.com and enter #28-248 the X bandsaw is also made in the USA Larry in Ohio