Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

OT: Vinyl chemistry??

Posts

OT: Vinyl chemistry??

#1

OT: Vinyl chemistry??

Rich Glisson

>I know there are some chemists here and I have a problem that I need help with. I have a number of Caradco double hung wood windows that are "dry glazed", meaning the 5/8" insulated glass is mounted in the wood sash using a vinyl gasket (pic below). Some brain-dead painters that I hired sprayed oil-based primer all over the gaskets instead of masking them. I put them in a bucket of paint thinner to soften and remove the paint, and the gaskets shrunk and stiffened to the point that they are unusable. I contacted Caradco (now Jeld-Wen) and they were utterly useless. They switched to "wet glazing" last year and no longer can supply the glazing gasket or tell me where I can find it elsewhere. They said I may need to buy new windows (thanks a lot!) I searched the web literally for hours and cannot find anything that resembles what I need, which has inside dimensions 5/8" wide and 5/8" deep. So....is there anything I can soak the gaskets in to restore the original suppleness of the vinyl? I'm afraid I know the answer, but am willing to try anything. Thanks!


img

Re: OT: Vinyl chemistry??

#2

Re: OT: Vinyl chemistry??

Barry Irby

>Can't help ith the chemistry, but....

I would try a commercial window or "store front" manufacturer. Also, makers of Aluminum patio doors. They use this type of dry glazing material. Look up PPG and people like that. Somebody should be able to find you a substitute.

Re: OT: Vinyl chemistry??

#3

JL

Re: OT: Vinyl chemistry??

JL

>Your surmise is correct. They are "toast". The paint thinner and paint leached the plasticizers out of the vinyl. They will never be supple again. Sorry.

You can "soften" them, but they can't be restored to their original shape and "texture".

Re: OT: Vinyl chemistry??

#4

Re: OT: Vinyl chemistry??

Mark Nowicki

>Rich

I got yards of this stuff, but only in grey or black.

I will be passing by a couple of window manufacturers tomorrow, I could try to find beige. Let me know if you are interested.

Mark

Re: OT: Vinyl chemistry??

#5

Re: OT: Vinyl chemistry??

Rich Glisson

>Hey, Mark--

The gasket is actually gray--the lighting in the pic was wacky. I would LOVE to get some gasket with the correct dimensions. The distance from the outside bottom to the sealing flange is 1/2" (this corresponds to the depth to which the gasket is seated in the sash). If you wouldn't mind measuring some of your gasket material it would be VERY much appreciated.

This stuff has been showing up on eBay, presumably because most mfrs have switched to wet glazing and liquidating their rolls of gasket. Unfortunately, there are a zillion versions of it and I have yet to find any with the right dims.

Thanks again!

Re: OT: Vinyl chemistry??

#6

Re: OT: Vinyl chemistry??

Larry in NW Ohio

>I have the same brand windows, but have 7/16" thick glass X 1/2" and would like to find some of the vinil glazing. What do you shearch for in ebay Love this site. Larry in Ohio

Re: OT: Vinyl chemistry??

#7

Search for:

Rich Glisson

>1. "glazing gasket"

2. "glazing channel"

Re: OT: Vinyl chemistry??

#8

Re: OT: Vinyl chemistry??

Jim Dillon

>Rich,

Assuming you have correctly identified the gasket material as a "vinyl", JL is correct; you did indeed leach the plasticizers from the vinyl. Vinyls, like poly(vinyl chloride) (aka PVC) are nortorous for containing usually a huge amount of plasticizer(s) to make them pliable, among other things. Sorry. Good luck in your search for a replacement gasket.

Jim

Re: OT: Vinyl chemistry??

#9

Ever hear of "UV Tech"?

Rich Glisson

>I found something called UV Tech that is supposed to restore lost vinyl plasticizers. REI sells it, and I may swing by there to pick some up and try soaking a gasket in it for a couple days. It is used on SCUBA gear, among other things. Here is the mfs. description:

McNett UV Tech� Conditions, Seals and Protects Plastic, Vinyl, Rubber, PVC, Leather, Fiberglass, Hypalon� and More.

Reduces Damage and Fading From The Sun.

Replaces Lost Plasticizers.

Protects For Easy Cleaning.

Improves Appearance, Enhances Color.

Nontoxic, Biodegradable, Nonflammable.

Re: OT: Vinyl chemistry??

#10

Re: OT: Vinyl chemistry??

Gary Camp - Bend, Oregon

>Rich what part of the country are you located in?

Re: OT: Vinyl chemistry??

#11

JL

Re: Ever hear of "UV Tech"?

JL

>There are a number of products that "claim" to restore plasticizers. Some of them actually work as a preventative measure. They often include plasticizers and UV inhibitors. Usually, once a plastic is embrittled, it is too far gone.

PVC and many other plastics often contain either the plasticizer DOA (DiOctyl Adipate) or one of the Phthalate esters. Phthalate esters are not very nice compounds, even though they work very nicely.

The plasticizer "slips" in between the main polymer chains, breaking up the crystallinity of the structure. Sort of like a molecular "grease" - at least that is one theory ("Lubricity Theory"). Other theories are the "Gel Theory" and the "Free-Volume Theory". Guess which one my Prof prefered :). So, you have a somewhat crystalline mass of vinyl with plasticizer incorporated into it. You leach out the plasticizer and you are left with a more crystalline mass. The question is, can you diffuse enough plasticizer back into your item, once it is leached out?

You can restore some of the flexibility to an item. If the UV Tech is cheap, give it a shot. I think you will have better luck with a new gasket though.

My $0.02.

Re: OT: Vinyl chemistry??

#12

Re: OT: Vinyl chemistry??

Rich Glisson

>Durham, North Carolina

Re: OT: Vinyl chemistry??

#13

Thanks...

Rich Glisson

>...for the tutorial! The UV Tech is 15 bucks for 16 oz.

Re: OT: Vinyl chemistry??

#14

Re: Ever hear of "UV Tech"?

Jim Dillon

>Rich,

I don't want to throw cold water on your parade, but I'd save my money. Those "rejuvinators" are intended for minor surface cracking/crazing, not for adding a plasticizer to the innards of the plastic. And, as JL alluded to, some of the phthalates (which are often used in PVC) are not so great to have around. In fact, one of the most widely used (DEHP) is coming under a lot of scrutiny for causing reproductive problems - at least in mice and other rodents. So I would carefully dispose of that paint thinner - especially if you want to have any more children 8-).

Jim

Re: OT: Vinyl chemistry??

#15

Re: OT: Vinyl chemistry??

Gary Camp, Bend, Oregon

>

Re: OT: Vinyl chemistry??

#16

I put a message in here, but...

Gary Camp, Bend, Oregon

>rich I was curious if there was a Jel-Wen plant near by, sometimes standing in front of of a customer service rep. helps, my guess is there isn't. An aquaintance of mine went to work in thier warranty department, I was going to give him a call but I can't seem to find his number. Jeld-Wen is one of the last few wood products companys in town.

glc

Re: OT: Vinyl chemistry??

#17

No gasket, period.

Rich Glisson

>Thanks, Gary. The double-hungs are made in Rantoul, IL. Supposedly the customer service guy and the plant manager walked through the factory there and verified that there is no more gasket material. It's ridiculous, because they used the stuff right up until about a year ago. Never occurred to them that maybe someone would need some of it. Sigh...