metal shrinkages
Don Scheppelman
>Wanted- Pattern makers metal shrinkage chart for shrinkages of different metals when making casting patterns. Please email Don at-- donsch0430@aol.com Thanks! -- Don
Knowledge You Can Build On — Est. 1998
metal shrinkages
Don Scheppelman
>Wanted- Pattern makers metal shrinkage chart for shrinkages of different metals when making casting patterns. Please email Don at-- donsch0430@aol.com Thanks! -- Don
Re: metal shrinkages
Robin Corell in Atascadero CA
>I have never seen a table in any of the shops I worked in. Patternmakers use shring rules and used ones can be had relatively inexpensive. Iron is 1/10" per foot, brass is 3/16" per foot, aluminium is 5/32" per foot.
Re: metal shrinkages *LINK*
Bob Lemon
>Don,
Here is a link for Properties of Metals
http://shopswarf.orcon.net.nz/metprops2.html
There are a couple of other links you might be interested in. http://www.metalwebnews.com/
http://www.martindalecenter.com/
Hope this helps. Bob
http://shopswarf.orcon.net.nz/metprops2.html
Re: metal shrinkages
Jim Pugh, Elyria, OH
>You can probably find what you want in a Machinery's Handbook. Most any toolroom machinist will have one or your public library. More stuff in there then you ever wanted to know.
Re: metal shrinkages
john mears
>What are you making? Steel is 2% iron is 1% aluminum or brass is 1.5%.
Have seen charts but that was 25 years ago.