Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Foot switch

Posts

Foot switch

#1

Foot switch

Lee Ohmart

>I was trying out a keyhole bit in my router and it occured to me that a foot (on knee) operated switch would be very handy. In rooting around my leftover electrical supplies, I came accross a dimmer switch that turns on and off when pushed in. Any reason why this could not be used as a switch?

Re: Foot switch

#2

Re: Foot switch

Garrett in Victoria BC

>You'd have to check the amperage rating. However, a proper foot switch costs about $15, so kludging up a substitute probably isn't worth the effort.

Cheers, Garrett

Re: Foot switch

#3

Ellis Walentine

I'm not an electrician, Lee...

Ellis Walentine

>...but I have installed a lot of dimmer switches in lighting circuits. Most were rated at 600 watts - not enough for a router.

Ellis Walentine, Host

Re: Foot switch

#4

Re: Foot switch

Robert R Clough - Thorncraft

>Both Garrett and Ellis are correct. Do NOT use a dimmer switch. It is not built for the work you wish it to do. It would work for a short time and then simply fail - at best. Years ago when I was much younger and poor (rather than being much older and still poor) I used to muck about doing what you are suggesting. Actually it was more expensive than buying something new, but it was also very instructive in how not to do matters.

Generally speaking never just "make do" and cobble up a device unless you know precisely what you are doing.

Thus endeth the lesson for today!

Re: Foot switch

#5

The reason

Phil Joines Krum, TX

>It's not just a switch. The electricity flowes through the dimmer circuitry. It can't handle the load, particularly the starting current.

Re: Foot switch

#6

Re: Foot switch

Trent

>I have an electronics engineering degree and over 10 years of industrial experience. You have received good advice about NOT using a dimmer switch for this.

There are several foot switches on the market that can do the job safely. Some are less than $30

Re: Foot switch

#7

Re: Foot switch

Lee Ohmart

>Oh, well. It was a thought. The local Western Tool and BIG BOX don't carry such an item so I guess it's time to mail order from Rockler. Thanks for the replies to my inquiry.

Re: Foot switch

#8

Re: Foot switch

Cam-Saskatoon Canada

>http://www.leevalley.com/wood/page.aspx?c=2&p=30049&cat=1,240,41065

Re: Foot switch

#9

MICRO-MARK also, but not as nice.

s.mackay@worldnet.att.net

>