Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

One Bis Log! **4 Pics**

Posts

One Bis Log! **4 Pics**

#1

One Bis Log! **4 Pics**

Ron in Drums PA

>I get a call from a friend today "Hey Ron, We're cutting one of the big logs today, Want to check it out?"

Like I'm going to pass this up!

It is 7'10" at the widest point! It had to be cut in half so it can fit into two containers on its trip from Africa. This section in the top half. Total length of the two logs is 36 FEET!!




This amazing quilted figure goes all the way though the log. I can't wait to see what it looks like with an oil finish.




This log is being slabbed for 2" thick table tops.

In case you are wondering, it's bubinga.

Re: One Bis Log! **4 Pics**

#2

Re: One Bis Log! **4 Pics**

Bob Falk

>Beautiful....what will be the price?

Re: One Bis Log! **4 Pics**

#3

Re: One Bis Log! **4 Pics**

Guy Kroll

>Ron, I am not to far from you in Kingston. Where is that mill at, would love to see it???

GUy

Re: One Bis Log! **4 Pics**

#4

HOLY crap!

Dominic Greco in Richboro PA

>Ron,

That is BEAUTIFUL!

PLEASE tell me you got some for turning stock!

See ya around,

Dominic

Re: One Bis Log! **4 Pics**

#5

That has got to be the......

Scott in Eastern Iowa

>....purtiest log I have ever seen!

Man, to see that in person would prolly be un-believable.

Wow is all I can say....lucky you to be there...thanks for posting!

Scott

Re: One Bis Log! **4 Pics**

#6

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Mike in Paradise

>(can't get my jaw off the floor to speak!)

Re: One Bis Log! **4 Pics**

#7

Stunning! Wish I could have just

Johanna

>a little bit of it! That's just the most beautiful log imaginable.

Re: One Bis Log! **4 Pics**

#8

Re: To everybody, what would do with that log??

Guy Kroll

>

Re: One Bis Log! **4 Pics**

#9

JL

Re:If you could afford it???

JL

>I think it would make a lovely table. I could also picture some it as fronts for a wardrobe (or any piece that would show the grain).

Re: One Bis Log! **4 Pics**

#10

Re:If you could afford it???

Guy Kroll

>That is another good point JL, What is the cost of something like that?

Re: One Bis Log! **4 Pics**

#11

Re: To everybody, what would do with that log??

Moses Yoder in White Pigeon, MI

>It is really sad to see a tree like that taken down. I am assuming the tree was old enough that it would have died in a few years anyway, and so the wood should be given a new life. If I had one slab of that tree I would probably have to build a new house to fit around it. I would make one wall of my living room designed to hang a slab on horizontally. I would smooth it and finish it carefully, then hang it on the wall.

Re: One Bis Log! **4 Pics**

#12

JL

Re:Search "Waterfall Bubinga"..

JL

>I've seen the normal Bubinga (and I have a nice piece) and that wasn't cheap. The normal ran about $16-20 / bd. ft. I have not a clue as to how much that would go for.

Re: One Bis Log! **4 Pics**

#13

Talk about wood porn!

Thomas Skaggs, Foothills of Mount Level

>Oh my gosh! This is one of those moments where I wish I had just won the lottery and could afford to buy it all! As it is I'm sure I can't afford even one slice. :-(

Amazing...and beautiful. Wish I had been there just to see it in person.

Thanks for the post and the pictures. But curse you for taunting us!

Tom

Re: One Bis Log! **4 Pics**

#14

Re: To everybody, what would do with that log??

Ron in Drums PA

>I agree, but the good news is the tree was dead when it was taken down. We guess that the tree is about 500 years old.

The owner hasn't settled on a price per bd ft yet. But he know he has something special and know what the market will bear.

Re: One Bis Log! **4 Pics**

#15

Re: HOLY crap!

Ron in Drums PA

>Dom, I was promised a couple of cut offs.

You can't tell from the photos but the sap wood is gorgeous with thin spalt lines running though.

Re: One Bis Log! **4 Pics**

#16

Re: One Bis Log! **4 Pics**

Keith Newton

>I'll bet that log is worth a lot more as a veneer log. @ $3.00 per foot, and 32 leaves per board foot, that is $112. I am just guessing that there is over 750 bd ft in the log.

Can you tell us how they made that cut? The dust on the floor looks too fine for a chain.

Re: One Bis Log! **4 Pics**

#17

Wow!

Stephen Kirk in Quakertown, PA

>That is fantastic looking. Maybe I could trade in house for some if it. I never knew bubinga could have figure like that. And you say it was shipped over from Africa. Quite a journey, but with figure like that, it's worth it.

Re: One Bis Log! **4 Pics**

#18

Re: One Bis Log! **4 Pics**

Ron in Drums PA

>He is one of those that would never consider veneer. He likes solid wood.

That first cut is from a chain. Later it will be cut on a band saw with 10" wide blades and a 50" throat. To start off he is cutting a few natural edge table tops with the chain until he can get it to fit into the into the bandsaw.

Re: One Bis Log! **4 Pics**

#19

Re: Wow!

Ron in Drums PA

>He tells me it took 6 months to get the log out of the jungle and to the shore for shipping. No roads in those parts.

I'd love to hear how they moved this myself. I bet it's quite a story.

Re: One Bis Log! **4 Pics**

#20

Re: To everybody, what would do with that log??

Tom Stockton

>My guess on price is $100 a board foot

Tom

Re: One Bis Log! **4 Pics**

#21

Smoke and Mirrors

Dave Morris

>Man oh man, the beauty of that wood almost defies description. The curling grain reminds me of smoke wafting from a campfire, or the heat waves shimmering off a hot surface. Imagine that wood as bookmatched drawer fronts, or the shelves and interior walls of a mirrored display case (with the perfect lighting, of course). With the mirrors, that grain would go on and on and ...

Dave--- who thinks a French Polish finish would invite diving into any table made of that wood

Re: One Bis Log! **4 Pics**

#22

prob a minimum of $45 a bd/ft at first

Ed Snow

>gilmer has had some of this in the past and it went for about $37 a bd/ft. since this is wide and with significant figure a wide premium will be applied so i would guess that it would sell at $45-55 for a bit but you would end up discounting portions of it in the long run.

veneer would have been an easier sell and more profitable, but if that is not the cutters cup of tea.

Re: One Bis Log! **4 Pics**

#23

When can I expect delivery!!

J D Thomas

>

Re: One Bis Log! **4 Pics**

#24

Re: One Bis Log! **4 Pics**

Larry in NW Ohio

>Ron Could you give a litte history. How did your friend get ahold of something like that? If he wouldn`t mind, how much did this cost him and to ship? Dose he have a web site that we comon people could buy some. I`m sorry to be so nosey. Larry in Ohio

Re: One Bis Log! **4 Pics**

#25

You're so mean....

HC Sakman

>So, how can we get some???

Chico...