Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Opinions needed-Excalibur 50-SLT-60 Sliding Table

Posts

Opinions needed-Excalibur 50-SLT-60 Sliding Table

#1

Opinions needed-Excalibur 50-SLT-60 Sliding Table

Sawdust Maker

>Hi everyone,

I have the oportunity to purchase the excalibur 50-SLT-60 for a reasonable price. I was wondering if anyone who have had experience with this slider would care to comment and or give their opinion? Both positive and negative comments appreciated.

Garrett, I know you did a review on the slider several years ago. Nice review. Wondering if anyone else has an opinion before I plunge into this purchase?

Thanks

Re: Opinions needed-Excalibur 50-SLT-60 Sliding Table

#2

Re: Opinions needed-Excalibur 50-SLT-60 Sliding Ta *LINK*

Rick Christopherson

>I'm late so I gotta keep this short, but I have had one for over 10 years and wouldn't give it up for anything. It is the reason why I was able to make ultra-high accurate miter cuts for building my expanding table. I chose to mount mine closer to the front of the saw than the directions advise, and as a result, I am able to cross-cut a 48-inch sheet without relocating the fence, like they say you have to do.

If you want to see some pictures, I know there are some miter-cutting shots in my table blog listed below.


Table Blog

Re: Opinions needed-Excalibur 50-SLT-60 Sliding Table

#3

Re: Opinions needed-Excalibur 50-SLT-60 Sliding Ta

GerryinSurrey formerly Agassiz previously Halfmoon

>I, too, am happy with mine. I also installed mine closer to the front of the saw and am able to crosscut 4'ers without moving the fence. The Excalibur sliders are a bearcat to setup initially but once set will give you dead on cuts as long as you don't move it or inadvertently change any of the setup. If you can get one for a reasonable price and have the room to set it up, I'd say go for it. I'd even pay retail for a new one if something happened to mine.

Gerry