Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Water Leaked, Edge of Boards Appear 2 B Warping

Posts

Water Leaked, Edge of Boards Appear 2 B Warping

#1

Water Leaked, Edge of Boards Appear 2 B Warping

AL

>We had some water leak in overnight onto our kitchen (wood) floor. It appears that the edges, on some of the boards, are warping a bit.

1) Is there a way to reverse this warping and have the edge of the boards become flush with the floor again< other then sanding them?

2) Is there a way to ensure it will not continue to warp more then it already has?

Other tips? Thanks in advance!

AL

Re: Water Leaked, Edge of Boards Appear 2 B Warping

#2

Re: Water Leaked, Edge of Boards Appear 2 B Warpin

Charles McCoy

>I wouldn't do any sanding until you've given the wood a chance to dry all the way.

Re: Water Leaked, Edge of Boards Appear 2 B Warping

#3

Re: Water Leaked, Edge of Boards Appear 2 B Warpin

Ted Wong

>Depends if it is engineered wood or solid wood. If the former, it'll probably be like that forever. If the latter it might go back down as it dries out and if it doesn't you can sand it back to flat.

We had a flood last December on our engineered wood floor. Completly trashed the engineered wood floor in our kitchen real disappointment even though the insurance co. took care of it.

Re: Water Leaked, Edge of Boards Appear 2 B Warping

#4

Re: Water Leaked, Edge of Boards Appear 2 B Warpin

Steve Evans

>Al

I'd get a fan on the area where the water was sitting, to dry the woods back down a bit as quickly as possible. There is still water sitting down in the groove, and possibly on the subfloor. Also, can you direct some air into the area of the subfloor from beneath to dry it out as quickly as possible. One thing that you want to avoid happening is compression set. The boards will swell up, and with nowhere to go will compress the wood fibres, as the board dries back out, it will shrink and leave a noticeable gap between the boards. As others have said, if it's solid wood, it should flatten back out. If it's engineered, prepare yourself for delamination.

Steve

Re: Water Leaked, Edge of Boards Appear 2 B Warping

#5

One other potenital problem

Gary Camp - Bend, Oregon

>If the subfloor is particle board, and most seem to be these days, is subfloor swelling. We blew a hose on the washing machine and didn't catch it for about 15 minutes. The "engineered" floor actually shrunk back down to the point that if didn't know that it had happened a normal person wouldn't notice, although I think most folks here would see it in a heartbeat. The subfloor was another matter. Enough water got under the finish floor to swell the subfloor and I felt that hump every time I walked down the hall.

glc