Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Hardboard questions...

Posts

Hardboard questions...

#1

JL

Hardboard questions...

JL

>I posted a countertop question earlier in the week. People suggested using hardboard as a sacrificial top. The manufacturer carries a number of hardboard products that are either available or can be ordered through local distributors. Here is an inventory listing.

Standard Hardboard

* 1/8" - 30x96", 30x120" & 48x96" sheet sizes

Full Tempered Hardboard

* 1/8" - 48x96", 49x97" sheet sizes

* 1/4" - 48x96, 48x120" sheet sizes

Pre-Finished Hardboard

* White 1/8" - 30x120" & 48x96" sheet sizes

* High Gloss White, "Marker Board" 1/8 - 48x96" sheets sizes

* Folkstone Grey 1/8" - 48x96 sheet size

* Black 1/8" - 48x96" sheet size

* Almond 1/8" - 48x96" sheet size

I figure I don't want the high gloss white :).

Has anyone had any experience with any of the others?

Re: Hardboard questions...

#2

Re: Hardboard questions...

NickB

>I'd go with the tempered. I find it harder than the plain (so it will hold up better, particularly the edges), and the oil or whatever it is they impregnate it with to make it "tempered" allows you to pop off glue drips, etc.

Hope this helps,

Nick

Re: Hardboard questions...

#3

Re: Hardboard questions...

Bill Howatt

>On my workbench I used the standard hardboard and gave it a couple of coats of clear finish like varathane for protection from liquids. Water is the enemy of hardboard.

Bill

Re: Hardboard questions...

#4

Re: Hardboard questions...

Tony - Memphis

>I use the 1/4" from Home Depot or Lowes. Not sure if it is tempered or not. But it works real well. Seems to be very tough. I have spilled everything you can find in a typical shop and nothing has bothered it.

Tony