Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

OT: Refrigerator -- Yeah, that can't be good

Posts

OT: Refrigerator -- Yeah, that can't be good

#1

A.J. Hamler

OT: Refrigerator -- Yeah, that can't be good

A.J. Hamler

>My refrigerator has started making a noise at the end of each cycle. It runs fine, and each cycle runs and sounds normal until it ends with a fairly loud CLUNK sound. It started doing this about a month ago. Otherwise, it runs absolutely fine -- temperatures and everything are normal, freezer normal, ice normal. The beer I keep in it tastes great. And the other stuff, too, but I have my priorities.

So far, I've been operating on the MIWGA principle. (Maybe It Will Go Away)

Any ideas what I'm up against here?

TIA

A.J.

Re: OT: Refrigerator -- Yeah, that can't be good

#2

Re: OT: Refrigerator -- Yeah, that can't be good

Dan Donaldson

>Take a look at the rubber mounts that hold the compressor. It has a jolt when it shuts off, and if one of those broke, it might be the cause of the noise.

Re: OT: Refrigerator -- Yeah, that can't be good

#3

Re: OT: Refrigerator -- Yeah, that can't be good

Ken Romines

>A.J.

I don't know what your refrig. problem is but I had a three year old one from a large national retailer that did the same thing. We had it repaired once, about 4 months ago, but it when on this past week end, our repairman said it was the compressor that had finally died. He said it would cost $750 for parts plus labor to repair--just go buy a new one -- by the way-- he didn't charge for the visit. We called the "large national retailer" because the compressor was still in warrenty, however, they had no record that showed that but for only $219 they would put us on the list to be seen by a repairman and that would cover any parts and labor. The visit was set up for a week later to see what parts would be needed, then a return visit would be sch for the complete repair. When asked what we were supposed to do for a refrig for the waiting period, we were told to make other arrangements. Yes, we will have the current model fixed, no, I won't buy another from that retailer.

My advice is to find a good repairman you can depend on, don't depend on sad, electricaly arranged repair services.

Sorry to be so down in the month.

Ken

Re: OT: Refrigerator -- Yeah, that can't be good

#4

Under the front at the bottom . . .

s.mackay@worldnet.att.net

>theres a unit, 'bout three by three that also will make a "spinning " sound. Can't remember whats its called but its " plug & play "for, like, fourty bucks. Could'nt miss it. Pop off that grill under the door. Should be right there. No expert here but that thing bought me another year or so.

Re: OT: Refrigerator -- Yeah, that can't be good

#5

Same problem once.

Virgil Johnson

>A repairman explained to me once that the motor inside the compressor housing is mounted on springs and one of the springs had broken causing the motor to vibrate when it stopped. He said it could last years or days.I don't know if this is true but it sounded good.

Re: OT: Refrigerator -- Yeah, that can't be good

#6

Jim DeLaney, Austintown, Ohio

Re: Same problem once.

Jim DeLaney, Austintown, Ohio

>Virgil,

I had an Amana - maybe thirty years ago - thet started doing that when it was about a month out of warranty. Service guy tolm me the same thing. It was still working just fine - and still making that noise - when I sold it with the house about ten years later.

Jim D.

Re: OT: Refrigerator -- Yeah, that can't be good

#7

Re: OT: Refrigerator -- Yeah, that can't be good

Steve in Fresno, Go Dogs

>As Virgil and Jim said, it's the compressor. We call it the "Death rattle".

As others have said, it could last 10 years or 10 days, but either way not worth the repair. Start saving for a new one, hopefully you'll have enough saved up when this Refer dies.

Re: OT: Refrigerator -- Yeah, that can't be good

#8

Re: OT: Refrigerator -- Yeah, that can't be good

Howard Norman-Prescott, AZ

>Ken, I had a similar experience with needed fridge repair a few days ago. Two years old Kenmore Elite. Would take a week for Sears repair to look at it. Found a small local shop that has been in business for 30+years. They were here in two days, had to order part which came in two days and they installed it the same day. Two trips but only one service call from a charge basis. They will get any repeat appliance repair business that I need.

Howard

Re: OT: Refrigerator -- Yeah, that can't be good

#9

Re: Same problem once.

Denis Ch�nard, Orl�ans, Ont.

>The exact same thing happened to me with the fridge we "inherited" with the house we bought. Got the same explanation, and eventually replaced the fridge because the noise when the motor stopped kept waking up the kids... But the fridge still worked even with that problem.

DC

Re: OT: Refrigerator -- Yeah, that can't be good

#10

Lee Gordon

Re: OT: Refrigerator -- Yeah, that can't be good

Lee Gordon

>That noise sounds ominous. You'd better ditch that refrigerator and replace it with a Mac. :-)

Re: OT: Refrigerator -- Yeah, that can't be good

#11

Re: OT: Refrigerator -- Yeah, that can't be good

paul in AZ

>Funny that this should come up today. I've been bugged by a very loud high pitched humming noise in a GE 'frig. Four service calls later -each with a 4 hour "window"- it is still not resolved.

Nobody to talk to. The call center is in Costa Rica [how's your Costa Rican spanish?] and all they do is book appointments. Cover charge of $75 for the repair man to walk through the door. Independents say call GE because parts are so hard to get. Even in a city the size of PHX parts have to be shipped to the GE service men from elsewhere. Wait a week, overpriced fan, controller board and labor rate, no change. Another service guy said "that noise is normal". Really??? Yet another try today so we'll see.

Do not replace your unit with a GE. One GE repairman said the Jack Welch era appliances break a lot. So much for Jack's slash and burn cost cutting. Welch could probably buy Costa Rica with his pay and retirement package. We suffer.

Re: OT: Refrigerator -- Yeah, that can't be good

#12

A.J. Hamler

Thanks all

A.J. Hamler

>I presented some of the ideas from here to my stepdad, who Knows Stuff, and he seemed to concur that it's probably not worth fixing. He agreed with the prevailing sentiment here that the refrigerator has either 10 more days to live, or 10 more years. I think I'll not worry about it, and start saving up for a new one.

Thanks all.

A.J.

Re: OT: Refrigerator -- Yeah, that can't be good

#13

Re: OT: Refrigerator -- Yeah, that can't be good

Rich in oviedo

>Seeing as how i have a bit of inside knowledge about sears service since i work for them i will say this, waiting a week for a service appointment in a dense population area in a industry like refrigeration is quite rare. In the area my section services the average wait is 1-2 days from appointment to service. The 4 hour window is however standard due to not knowing for certain how long any given service call will take, the large area a single technician must cover and numerous customers to be serviced.

Rich

Re: OT: Refrigerator -- Yeah, that can't be good

#14

Re: OT: Refrigerator -- Yeah, that can't be good

Howard Norman-Prescott, AZ

>Rich, I don't live in a major population area. There are about 50,000 people in the area. As I understand Sears outsources most of their appliance repair here. BTW, the part, evaporator motor, was cheaper from the independent repairman than if I had purchased it from SearsParts.

Howard

Re: OT: Refrigerator -- Yeah, that can't be good

#15

Re: OT: Refrigerator -- Yeah, that can't be good

Rick in Colgate, Wi

>My mother had a GE refrigerator that clunked when it shut off, lasted 5 years after the serviceman told her it was the compressor and if the noise didnt bother her to let it go until it broke for good.

Re: OT: Refrigerator -- Yeah, that can't be good

#16

Re: OT: Refrigerator -- Yeah, that can't be good

jmohnike

>Have you pulled the refer away from the wall and removed the back cover, if any, and watched a complete cycle. If it is somthing as simple as a mounting bracket or spring you should be able to see that and repair it yourself.

My sister's refer sounded like WWII pop, bang and various other noises. The repair man said it was done for and to replace it, which she could not afford. I looked at it took it out side laid it on its back and blew the thing out with a compressor. She had several cats and dogs and the hair and dust filled the coils, after blowing out the "potting soil" I put it back into service and it is still working sliently, that was 5 years ago. The dust, dirt etc did not allow the coils to do there job and caused excess pressure and heat in the system, plus her electric bill went down.

Just food for thought

Joe