Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Source for threaded inserts

Posts

Source for threaded inserts

#1

Source for threaded inserts

Mitch from TN

>Hello all,

I'm looking for threaded inserts size 5/16 - 24 preferably made from brass. I've looked at Lee Valley, Woodcraft and Rockler but didn't see them in that size. Can anyone recommend another source?

Thanks,

Mitch

Re: Source for threaded inserts

#2

Re: Source for threaded inserts

john lucas

>Lowes carries them unless it's as lousy as my Lowes store. They run out of everything. My local true valley hardware also has them. Highland Hardware in Atlanta has them also. I usually keep some in my mixed stuff drawer but I don't have any bigger than 1/4 x20 right now.

Re: Source for threaded inserts

#3

Re: Source for threaded inserts

Mitch from TN

>Thanks for your response, John. However, I looked at Highland Hardware and they only have 5/16 - 18. Geez, I'm having the hardest time finding these things! I'd appreciate any more suggestions.

Thanks again,

Mitch

Re: Source for threaded inserts

#4

Link

Curly Smith

>http://www.ezlok.com/InsertsWood/hardWood.html

Click on Distributors and you'll get a long list of the usual suspects

Re: Source for threaded inserts

#5

Re: Source for threaded inserts *LINK*

john lucas

>Sorry didn't read the post close enough. 5/16x24 was harder to find. Try the link below. I did find it in thier paper catalog. They are listed under EZ-Lock thread inserts. Its listed EZ-13 They are Brass. My catalog might be old, I couldn't find a date on it.


http://www.reidsupply.com

Re: Source for threaded inserts

#6

McMaster-Carr *LINK*

Brian Hahn in SW Wisconsin

>McMaster-Carr carries them.


McMaster-Carr

Re: Source for threaded inserts

#7

Here's a couple I've used

Phil Joines Krum, TX

>http://www.nutty.com/threadrepair.shtml

http://www.smithfast.com/ezlok.htm

Re: Source for threaded inserts

#8

Re: Source for threaded inserts

Sue McLam in Orange, VT

>Mitch,

You could also try www.fastenal.com. Only thing is they don't ship directly to you...they ship your stuff to their nearest store. But then the store would ship it to you if you can't pick it up. Small quantity order can take 2-3 weeks but they sure do have a lot of stuff!

Sue

Re: Source for threaded inserts

#9

Re: Source for threaded inserts

Mitch from TN

>Thanks, everyone, for your responses. I ended up going with McMaster. I knew I could count on Woodcentral folks!