Re: Grizzly Equipment
Ray Carson in Lawrenceville, NJ
>I would have to agree with Jesse. I would wait to see if someone has used that exact model before buyinig. Not because it's Grizzly, I would do that with any tool. Seeing a tool hands on is must in my book. If possible .....of course.
I own mostly all Grizzly machines:
G1022Z Contractors Table saw
15" Band saw
G1028 dust collector
G0462 Lathe (recent purchase)
12 1/2" Planer
6 x 48 Combo Belt / Disc Sander
Hollow Chisel Mortiser
That being said I am happy with most of my tools. The table saw has received many upgrades over the years. Fence being the biggest item. I bought the saw in 1994 and many improvements have been made to this model since including better fences.
The bandsaw is great although the table has a bit of flex. This also was improved in newer models.
Aside from the table saw and lathe, the rest of the tools were purchased together around 1998-2000.
My lathe is my most recent purchase and although I haven't used it much, I'm happy with it so far.
As in one of the other posts, the newer green and white machines are "in another class" than Grizzly's smaller machines.
I don't work for Grizzly and I'm a hobbyist woodworker at best so this is just my experience with their machines from basically 1994.
I must say that their parts and service department are excellent. In the last 8 years ...I've maybe called them 3 times for replacement parts or worn parts. Once was for a part on my hollow chisel mortiser. The piston went bad that holds up the motor head. Replaced by Grizzly for parts cost only. Honestly forget what the others were. My other calls were mostly for stuff like planer knives, sanding discs and belts, dust collection parts. Nothing regarding defective parts or parts that couldn't stand up to daily wear and tear.
My 2 cents worth,
Ray