Work pricing challenge
Lee Schierer - McKean, PA
>Okay, so a guy you work with asks you to cut some dados and rabbets on some boards he has to make a simple bookcase. The boards are roughly the right length but the ends aren't quite square and you also need to rip down teh two shelves and cut a rabbet along the back edge of the four pieces that make up the frame.
Here's what I did:
1. Squared the ends and cut all pieces to the exact lengths needed.
2. Cut four rabbets and four dados in the two side pieces to accept the top bottom and two shelves.
3. Cut a rabbet on one edge of the two sides, top and bottom.
4. Ripped the two shelf boards to width
5. Glued the six pieces together, making sure the glue up was square and flat.
6. Sanded the four corner joints flush and cleaned up the glue on the front surfaces.
What would you charge? I deliver it to him tomorrow.
Lee



