Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

2 easy questions:

Posts

2 easy questions:

#1

2 easy questions:

Terry Alexander

>1. On trim that goes along the baseboard.....why is there a depression in the middle of the trim? Kind of like a 1" wide by 1/8" deep dado.

2. I have over 100 bf of 3/4" x 6" x 8' ash. Got any suggestions for a project for this type of wood? It doesn't have a lot of what I would call "character".

TIA

Terry Alexamder

Re: 2 easy questions:

#2

1 easy answer ...

Mike Farinella

>1. The back of the trim is relieved to take into consideration irregularities in the wall.

Re: 2 easy questions:

#3

Another easy answer...

Jesse in New Mexico

>Ash is an excellent wood for furniture. If it doesn't have a lot of "character", you can pump it up with some analyne dye or (gasp) even paint it. It is open pored like oak or walnut, so you might want to seal the pores, depending on the look you like.

3/4 stock would work fine for case work, cabinets, bookcases, etc...

Re: 2 easy questions:

#4

Re: 2 easy questions:

Thomas Skaggs, Foothills of Mount Level

>Ash is much like oak to work with. Some may even mistake it for oak. Some projects with a lot of details benefit from wood that has little "character". Consider it for such. The price of ash is bound to rise as it becomes more scarce. The Emerald Ash Borer will guarantee that.

Hang onto it...it's good wood!

Tom

Re: 2 easy questions:

#5

Egads!

Mark Goodall - ATL - tooljunkie

>".... irregularities in the wall."

Don't house builders in your area carry around Starrett squares to make sure everything is perfect 90� to each other?

When you think about it, the whole purpose of trimwork is to hide the irregularies, mistakes, mis-measurements, and once in a while the expansion movement of wood.

Happy Woodworking!

Re: 2 easy questions:

#6

Emerald Ash borer has me scared....

Tim Greif - West of Chicago

>Infestations have now been reported in Chicago's surrounding areas. I have six ash trees that I planted as seedlings when I built my home 18 years ago. I hate the thought of losing them, but it sounds inevitable. Bummer!

Re: 2 easy questions:

#7

Relief cuts

Dave Bair, Eaton Rapids, MI

>Actually, the relief cuts are to account for uneveness on the nailing surface. Especially where the wall encounters an edge (door, window, floor, corner), the plaster or drywall mud tends to be a little rough and uneven. The cuts, hopefully, allow a tight fit at the visible edge of the trim without having to address the wall texture.

Re: 2 easy questions:

#8

Re: 1 easy answer ...

David Hay @ Denver

>The relief cut also allows the trim to flex a little so that it can follow the contour of a slightly curved wall.

David