Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

solid maple vanity top!

Posts

solid maple vanity top!

#1

solid maple vanity top!

Steve Silca

>I have access to several 3' x 6' solid maple 1 1/2" thick table tops from my high school. They are getting rid of them. At the school, I plan to plane them down to expose new maple (we have a 24" surface planer).

I would like to use part of one of them to make a new top for my vanity. After sanding and staining the fresh maple, what would you put on as a good finish that will be impervious to water? How many coats?

Thanks!

Re: solid maple vanity top!

#2

Re: solid maple vanity top!

Clint Searl, at the base of Haycock Mtn

>Behr makes a clear water based one-part epoxy for garage floors that I think will work well. I used it on a carved wood sign (two coats) a couple years ago. The sign has been continuously exposed to the elements and shows no deterioration. I plan to use it on a bathroom vanity top of ash.

Clint

Re: solid maple vanity top!

#3

Available at Home Depot?

Steve Silca

>

Re: solid maple vanity top!

#4

Yes

Clint Searl, at the base of Haycock Mtn

>

Re: solid maple vanity top!

#5

A question about that epoxy, Clint.

Gary Evans Tallassee, TN

>How is that clear floor coating for dispersing bubbles? I have some display tables that I would like to epoxy, but much of what I've seen with epoxy coatings has had an excess of bubbles, at least in my view.

I know you have to be careful about stirring in bubbles with epoxy and wonder whether this stuff has it over 2-part epoxies in the retaining bubbles category.

Thanks,

Gary

Re: solid maple vanity top!

#6

Re: A question about that epoxy, Clint.

Clint Searl, at the base of Haycock Mtn

>This stuff is nothing like the two-part epoxies; it's more like a heavy bodied water borne poly. I used a poly/nylon brush to lay it on in a fairly heavy coat without working it too much, as it sets up pretty fast. Didn't get any bubbles. Two coats is plenty. I'm gonna try a test to see how it rubs out.

Clint