New power tool for my wish list
Eddie Pacheco, San Jose, Ca.
>This weekend I have spent putting in a "Poloma" tankless water heater to replace our regular heater that decided to spring a major leak yeaterday. I chose a 199kBtu model from HD along with it's pricey stainless steel exhaust stack. I hear that Noritz may have a better unit, but the pro dealer for those isn't open on Sat. and I needed to get this fixed.
Anyway, while finding out that a lot of plumbing is going to be moved to make room for the Poloma, I wnet ahead and got busy. After 2 trips (of many), yesterday to get some 1" gas pipes cut to length and threaded, I had to return them as they were threaded wrong. On the way back home I stopped by the home of the plumber (also neighbor) that had done our home copper pipe conversion to see if he would install my water heater for a fee. I was frustrated with plumbing by now. He was busy working on some dirt track car he got and told me to just go ahead and do it myself and if needed he would stop by. When I explained the pipe fiasco he went to his truck and brought out a handy little gem of a power threader. It's called "REMS Amigo 2". He gave me a brief lesson and I was off. Man, this is the coolest pipe threading tool I have used. I was able to reroute the gas line with nice, accurate, custom pipe lengths and do some other plumbing this weekend and even ran a gas line to my BBQ to convert it to natural gas. I was able to make the plumbing look pro instead of my usual all cobbled up with precut lengths and unions and stuff. Too bad this tool sells for about $600 without dies.



