Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

OT---Best glue for rubber?

Posts

OT---Best glue for rubber?

#1

OT---Best glue for rubber?

Gary Evans Tallassee, TN

>Hi all,

I'm installing a rubber bushing on a shaft where it goes through a bracket. The bushing is split down one side for installation. I'd like to glue the cut surfaces together, even though the bushing is captured against the bracket by a cupped washer.

I know there is a website that has glue recommendations, but I guess I've never bookmarked it.

Thanks,

Gary

Re: OT---Best glue for rubber?

#2

Contact cement

Clint Searl, at the base of Haycock Mtn

>

Re: OT---Best glue for rubber?

#3

Re: www.thistothat.com

Al Stokka - Cambrige, Iowa

>

Re: OT---Best glue for rubber?

#4

Depending...

Lee Schierer - McKean, PA

>Depending on the type of rubber, the instant adhesives generally provide a bond stronger than the rubber. Be sure you get the edges aligned perfectly before touching them together becasue the bond is instant. Touch the edges like you are trying to squeeze out the excess from one side to the other while keeping them in contact and perfect alignment.

Try the bond on some scrap if you can before trying the real pieces.

Lee

Re: OT---Best glue for rubber?

#5

Re: www.thistothat.com

Gary Evans Tallassee, TN

>That's the one I was thinking about, Al.

Thanks a lot. I'll bookmark it this time.

Gary

Re: OT---Best glue for rubber?

#6

Re: OT---Best glue for rubber?

Robin Corell in Atascadero, CA

>for some types of urethane rubber CA glue works extremly well. For neoprene shellac will work but needs a long time to dry and can not be disturbed until completely dry.

Robin Corell