Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Cassarole carrier

Posts

Cassarole carrier

#1

Cassarole carrier

Bobby

>Finished up a couple of these for a friend of ours who got some orders for them from her ladies group.

It's a cassarole dish carrier made from laminated pieces. I used oak, maple, cherry and mahogany. The holes are for some dowels to hold the dish in place while carrying it. The dowels are carried in some strips on the underside of the board. I just rub it down with mineral oil for the finish.

Bobby

Louisiana


img

Re: Cassarole carrier

#2

Re: Cassarole carrier-backside 

Bobby

>


img

Re: Cassarole carrier

#3

Great idea.................

Lee.............

>

Re: Cassarole carrier

#4

Hey, hey ! . . .

s.mackay@worldnet.att.net

>Two questions : Could you show it when its together ? Would you mind if I were to poach your design ? Been looking for something to transport my beloved Pampered Chef dishes and they want to much for their holders. This one looks like it won't bounce around in the floor of the truck cab ! Personal use only, mind you.

Re: Cassarole carrier

#5

Ellis Walentine

Nice idea, and a suggestion

Ellis Walentine

>I'd suggest reinforcing the short grain handles at the ends of the board, Bobby. It won't be long before somebody bumps one of those handles, or the dishwater gets to them, and you'll have missing segments. A kerf that goes all the way down to the handle hole, with a spline glued in, is probably all you need.

Just a thought. The dowel trick allows you to use any size dish. That's pretty nifty.

Cheers,

Ellis Walentine, Host

Re: Cassarole carrier

#6

Re: Cassarole carrier

Don Orr

>Nice job Bobby, I like the wood choices a lot. Do I remember seeing this project in one of the WW magazines a while back ? I vaguely recall seeing something like this somewhere before. I'm sure the ladies (or men) will enjoy this very much.

Re: Cassarole carrier

#7

Re: Hey, hey ! . . .

Bobby

>Feel free to make one. The size of this one is 20" x 11 1/2". The placement of the holes you have to kind of play around with based on the size of the cassarole dish you want to use. You can use several different size of dishes because of the placement of the dowels. Your not going to get a perfect fit for every dish, but it still works to keep them from slideing around while carrying them.

Also the idea about the spline in the short pieces in the handle is a good one. I havent had a problem with this yet, but it could be a weak spot. I will have to try this on my next one.

Bobby