Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

OT New PC purchase frustration

Posts

OT New PC purchase frustration

#1

OT New PC purchase frustration

Stuart Johnson

>I finally decided to replace both my and my wife's p.c. A new laptop for me and a desk top for her. Here comes the frustration.

The laptop I'm looking at is HP dv9000t. The voice help line says it can not be used with a dial-up connection but the live chat says it has a RJ-11 connection. Which should I believe or are both correct? Wouldn't the RJ-11 connection indicate a dial up modem? I'm going to post a second broad band question.

The same voice help says neither the laptop nor a HP s7700e series can connect to a printer using a parallel port. They both use USB only. This wouldn't be too bad for my wife but I use a Laser Jet 5 as my work horse printer. Is there any type of adapter that can be used? The live chat was no help.

Re: OT New PC purchase frustration

#2

Re: OT New PC purchase frustration *LINK*

John McGaw

>I wouldn't worry about what some non-official source says. HP's own sales website tells me that the notebook has:

4 Universal Serial Bus (USB 2.0)

1 IEEE 1394 Firewire Port

1 Expansion Port 3

TV-Out (S-video)

Integrated Consumer IR (remote control receiver)

5-in-1 Digital Media Reader

Microphone in

1 RJ-11 (modem)

1 RJ -45 (LAN)

1 VGA

1 HDMI (Dedicated graphics only)

Online reviews tell me that it has a modem with fax capability built in.

As for the lack of parallel ports, that is easy to believe -- they've been becoming more and more scarce over the years. Along with a Dell network-aware color laser I have a LaserJet 5P on my network. The 5P is connected via a Netgear PS101 mini print server so that both printers are accessible from any computer on the network. This is very useful and would be hard to get along without now that I'm used to it. But if you insist on going without a network there are quite a few adapters sold that will allow a parallel printer to work over USB. Some sample are shown here but there are many makers and I'm not advocating any one of them.


USB to Parallel

Re: OT New PC purchase frustration

#3

Re: OT New PC purchase frustration

Bill Howatt

>Another option that may or may not be suitable for you is to use the old computer as a print server and just access it through the network with sharing.

I have several networked PCs and they all use either the HP laser or the Epson inkjet connected to another PC.

Bill

Re: OT New PC purchase frustration

#4

Re: To use your printer...

Grant Smith

>You can get a device that allows your printer to be used by any computer connected to your home network (assuming you have one).

HP makes one called JetDirect. I believe they are called "Network Print Servers", or also "Wireless print servers", which allow any wireless capable machine to print without wires. I use an old JetDirect one on our HP laserprinter with no problems. My wife can then print wirelessly to it from her laptop, and I can also print to it from my desktop computers.

I'm sure other manufacturers also make such a device, perhaps others will chime in with other models.

I think you can also get an adapter that allows you to connect to a parallel or serial port from a USB port on your PC.

Re: OT New PC purchase frustration

#5

You can even get just a cable...

John in New Mexico

>I just bought one to go from the USB on my HP notebook (no parallel port) to our antique Laserjet 4p. Works great, both in XP and linux.

Re: OT New PC purchase frustration

#6

Re: OT New PC purchase frustration

Ken Oakley-Sunny St. Cloud, Fla.

>If you think you have frustration now dealing with HP, just wait till you own their products. I would do witout a computer rather than buy one of theirs and try to deal with their support. Burn me once, shame on you. Burn me twice, shame on me.

Re: OT New PC purchase frustration

#7

Re: OT New PC purchase frustration

ScottS

>Agreed. My company owns numerous HP laptops, a few desktops, and a printer to two. We've been sorely disappointed with the quality of the products themselves and especially the level of support.

I bought a Compaq laptop for myself, before I knew any better. Five or six days after it arrived, the single screw that held the DVD drive in the chassis fell out. Since I own a screwdriver, I called HP/Compaq Support to have them send me another screw. Nothing fancy: just drop a couple of screws in an envelope and stick a 37-cent stamp on it. You'd have thought I asked for a free trip to the moon! Talked to 3 or 4 people who all insisted that I would have to mail the machine to them for diagnosis and service (min. 2 week turnaround) OR take the machine to a local repair shop (which charges for a minimum of one hour of labor @ $65/hr) and pay to have the screw replaced.

Finally told them I wanted to return the machine and get my money back, since I was within their 14-day return period. Once I said that, they managed to transfer me to someone who arranged to have a package that contained every screw in the laptop sent to me via FedEx! The end result was decent, but the two hours I spent on the phone to get to it left a very bad taste in my mouth. Aside from a power adapter (replacement cost: $80!) that failed after 18-24 months of ownership, the machine has been very reliable.

But next time I'll be buying from Dell...

Re: OT New PC purchase frustration

#8

USB to parallel cable *LINK*

wilbur

>I think John is talking about a cable like this one.

I actually highly dislike Tiger Direct, but it's the first link that came up in my quick search.


Example of USB to parallel cable.

Re: OT New PC purchase frustration

#9

Thats it...

John in New Mexico

>Only I bought mine for three times the price at Compusa!

John

Re: OT New PC purchase frustration

#10

Re: OT New PC purchase frustration

Kevin Rabenaldt

>Its a shame to buy a $40 cable for a $2 parallel port. There are plenty of printers that need it.

Of course, you can't build a laptop, but from now on I am building my own. I build one about 8 months ago and it works great.

Kevin