Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Burr Management aka Sharpening *LINK*

Posts

Burr Management aka Sharpening *LINK*

#1

Burr Management aka Sharpening *LINK*

Peter Galbert

>I've posted some observations on sharpening what we can't see


Chair Notes

Re: Burr Management aka Sharpening *LINK*

#2

Re: Burr Management aka Sharpening

bill tindal, E.TN

>Your hypothesis on edge dulling is not supported by pictures taken of edges dulling. I have never see a picture showing a bent over edge on a plane iron. However, I have seen at least a deformed, but not bent over, edge on some chisels ( a particular steel) used for dovetailing and other pounding operations. Typically, the toughness of the tool steels used for woodworking tools will lead them to fail by chipping if a fine edge is subjected to a bending force. On a plane iron the original edge is simply gone, presumably from abrasion, a seen in the typical attached picture.

Re: Burr Management aka Sharpening *LINK*

#3

The PIC 

bill tindal, E.TN

>


img

Re: Burr Management aka Sharpening *LINK*

#4

Re: The PIC

Peter Galbert

>You could very well be correct. What I am refering to is based more on the experience of feeling a burr, or bent teeth on a tool and taking it to my finest stones and "touching it up". This most often returns the edge to a useful state. Of course, through extended use, the edge will be dull and need more intensive honing.