Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Help - Dewalt 621 router owners

Posts

Help - Dewalt 621 router owners

#1

Help - Dewalt 621 router owners

john cole

>I recently bought a DW621 router - great router - love it, however I can't seem to figure out how to lock the switch on for router table operations. The instructions say to press the plunger, pull the trigger to start the router, then pull the plunger toward you to lock on - tried this doesn't seem to work. It must be something I'm doing wrong because this is the second one I've tried.

Can someone who owns this router give me some hints

Thanks

Re: Help - Dewalt 621 router owners

#2

Re: Help - Dewalt 621 router owners

Kirk (KC) Constable

>That (and many other locking switches) takes some getting used to... especially upside down. I put a separate switch on my router tables so I can just leave the routers 'on'.

KC

Re: Help - Dewalt 621 router owners

#3

Agree

HC Sakman

>Upright, 621's rigger lock works well after just a few try, but upside down is a different story.

My favorite hand held router.

Chico...

Re: Help - Dewalt 621 router owners

#4

Re: I've got one, but it has been a while since I

Al Crandall (N.E. of Indy)

>I've got one, but it has been a while since I have used it. As I remember, the "pull the trigger to you" motion is a two part motion. Pull the trigger to start the router, and then using a rocking motion or maybe a sliding motion, depress one end of the trigger into the housing. It is rather sensitive and I remember having the router quit several times because I didn't keep the pressure just right as I released the trigger. A quick bump of the trigger is all it takes to shut the router off.

Re: Help - Dewalt 621 router owners

#5

Re: Help - Dewalt 621 router owners

Jerry Nicholson

>I have modified the switch on mine so that it operates much more smoothly but as a result the lock no longer works. I think the DW621 is the greatest router going for hand held work (after you buy a couple of Pat Warner's bases) but it is really hard to adjust when hanging from a table. I bought a Freud FT2000 exclusively for table mounted use (removed the springs and rubber booties) and it is FAR easier to use with the table than the DW621. If you must use the 621 under the table, do like others have suggested and get an external switch.

Jerry