Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Holder for power drills

Posts

Holder for power drills

#1

Holder for power drills

Greg W

>I am looking for ideas for a holder my cordless and corded drills. Anybody now of plans ideas etc.

Thanks,

Greg

Re: Holder for power drills

#2

4"pvc pipe

Marvin Horn

>Saw a tip about using short sections of 4"pvc pipe with cutouts for the handles several months ago in a magizine. It made it to my "round toit" list but not any farther. Sections were mounted under cabinets/shelves.

Re: Holder for power drills

#3

Bolts.....

Mark Goodall - ATL - tooljunkie

>I use alot of salvaged steel and bolts in my workshop for things like this.

I've got a 1/4" thick angle steel, about 4" x 4" by 36" mounted to the wall.

The top is a ledge to put the chargers on.

The face part, has 5/16" holes spaced abuot 2"-3" apart. I cut off the heads of some 6" long bolts and bolted the 5/6"x6" bolts to the steel, so they stick out perpendicular to the wall.

Each of my cordless dril hangs upside down between two rods (bolts with heads cut off). The fatter battery keeps them there.

I'll take a picture this weekend. It will make much more sense if your SEE it.

Happy WOodworking!