Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

anti vibration pads

Posts

anti vibration pads

#1

anti vibration pads

Tony Zaffuto

>Usually I'm over on the handtool side, but since most of us don't own up to burning electrons, I couldn't very well ask this question there!

I'm looking at some upgrades to my Jet 14" bandsaw and would like to add some anti-vibration pads/feet to the saw. Does anyone here have any suggestions as to types and/or suppliers?

Thanks in advance!

Tony Z.

Re: anti vibration pads

#2

Re: anti vibration pads

John Ross

>I have had really good luck with the cork and rubber units that Grainger sells. I've installed hundreds under air compressors to keep them from "walking." I think the two "boxes" may have the rubber units in the tool section where the air compressors are. They typically run $7-15 each. Good luck, John

Re: anti vibration pads

#3

A.J. Hamler

Hockey pucks

A.J. Hamler

>Pick up four ordinary hockey pucks at your local sports place. Get four bolts of the size you need to match the hole in the bottom of the tool legs, and four washers for the bolts.

Drill a hole the size of the washer about 1/4 to 1/3 of the way through the center of the pucks. Drill holes the size of your bolt through the center of the countersink you just drilled.

Slip the washers on the bolts, slip the bolt/puck assembly through the holes on the underside of the tool legs, and from the top attach the nut onto the bolts.

Rock solid, but no more vibration.

Goal!

A.J.

Re: anti vibration pads

#4

Ditto

Jim in N. Va.

>Hockey pucks work great--and at $0.99 each even a cheapskate like me can afford to put them under his tools.

Re: anti vibration pads

#5

There Is a Difference, eh!!

Jim Shaver - Oakville, Ontario

>Hi AJ,

The puck idea is a well known one here in the great white, eh! But the deep secret I�ll share with you is to make sure you get the ones made in Canada eh, like you know they have off shore pucks now too eh, talk about globalization.. they kinda don�t work like the Canadian ones eh�so like, check out the �made in �.� on the puck eh, make sure you the Canadian ones eh, cause like they have the right stuff eh!!!

Photo Sharing and Video Hosting at Photobucket

Trust me, when you have stopped as many as I have you know the difference, eh!

Take care, eh!

Jim

Re: anti vibration pads

#6

A.J. Hamler

Wait a sec...

A.J. Hamler

>That's not a hockey puck in that glove...

It's a chocolate donut!

Eh?

A.J.

Re: anti vibration pads

#7

I'm reporting you AJ *LINK*

Mark Goodall - ATL - tooljunkie

>You're going to be sorry when they hear about THIS!

Happy Woodworking!


img

http://www.adoptapuck.com/

Re: anti vibration pads

#8

You know a REAL Canadian puck is...

Mark Goodall - ATL - tooljunkie

>The greatest hockey puck of all time.... Peter Puck!

Happy Woodworking!


img

Re: anti vibration pads

#9

Roll Up The Rim

Jim Shaver - Oakville, Ontario

>Good Eye A.J. It's a Timmies Chocolate dip eh, you need a double-double to wash 'er back eh! Don't forget to roll up the rim either my son...

Now if this doesn't make your heart warm noting will, eh!

(all the Canadians in the audience are looking for some loose change right now and planning their next drive through now as they read this)


img

Re: anti vibration pads

#10

Is the OHL inferior hockey??

Lee Schierer, McKean, PA

>I have a puck that smacked me at one of the Erie Otter (OHL) games I went to right here by my desk. It says "VEGUM Official Made in Slovakia" on the side. Does that mean it is inferior hockey I was watching?

In my opinion a hockey puck is a bit hard for vibration dampening.

Lee

Re: anti vibration pads

#11

JiMMMM...!

HC Sakman

>I am just about to do it. You know it's close to me! Thanks a lot!

Damn you Shaver! ;-)

Chico...