Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Wine Cabinet - IV

Posts

Re: Wine Cabinet - IV

#26

Jim,

HC Sakman

>You left me speechless, what can I say? Perhaps I can say this: As you already know, I also built many other furniture that are not insprational, just ordinary. So, I always strive to do better and unique each time I get the opportunity.

Thanks Jimmy!

Chico...

Re: Wine Cabinet - IV

#27

Thanks Jenny-girl...!

HC Sakman

>

Re: Wine Cabinet - IV

#28

Feet

HC Sakman

>Thanks Tom.

You're right about different woods turning pieces into clown furniture. It's a very fine line to walk on. So easy to overdo the details, turn a piece into a tacky one as well as clowning it around. ;-)

About the feet... these maple buttons are 1/4" high and make a 300 lbs. piece glise on the floor easily. Nevertheless, my point is that your 1/2"s half is already taken care of! ;-) Actually, from my designing point of view, getting the lower stretchers' ends so close to the feet is a feature.... to me.

Thanks very much for the quick critique and also thank you for your compliments Tom.

Chico...

PS: Picture does not belong to this piece, though it has exactly the same buttons under each leg/post.


img

Re: Wine Cabinet - IV

#29

Question

Pat Evans

>Is there a reason, other than to display the book matched grain, that the door top and bottom rails are full width rather than full length side stiles?

Beautiful work! Something for the rest of us to aspier to.

Re: Wine Cabinet - IV

#30

Also..Tom & John,

HC Sakman

>3rd. cabinet was in the gallery for 3 weeks 'til some English tourist couple walked in, bought it on the spot and air-shipped it to England with themselves.

Just a day before, a local couple were contemplating over the same cabinet and sure enough, after the English couple just left, they came in and they saw that it's sold. So, they ordered one for themselves that day. 2 sales in one day was not that bad! ;-)

Chico...


img

Re: Wine Cabinet - IV

#31

Inside of the WC-III

HC Sakman

>Koa had stunning chatoyance despite having no curly figure. It was simply shimmering, though, nice but plain walnut boards residing inside.

Side walnut burl panels are from the same flitch.

Chico...


img

Re: Wine Cabinet - IV

#32

Re: Question

HC Sakman

>The other reason is to accomodate the barrel (I know they're actually made by Soss but I can't think of a better name...Perhaps "PIN" hinges? ) hinges (shop made) with side/edge grain instead of vulnerable end grain.

The hinges are oil impragnated bronze bushings 1/2" x 1/2" accomodating 1/4" polished steel pins. Each side takes 4 bushings, 2 for the door, 2 for the frame. In the picture, hole is empty.

Note the narrow cove inside the leg/post as well as the wider cove in the inner cabinet side -oiled part of walnut- to accomodate the inwards swing of the door. Also note that the doors are 1" thick and their every single component came from a single 12/4 x 7" x7' long piece of qs cherry.

Thank you.

Chico...


img

Re: Wine Cabinet - IV

#33

Thank you guys...

HC Sakman

>

Re: Wine Cabinet - IV

#34

Stunning

Pat Evans

>The more detail one sees, the more stunning that piece is. Did you cut the wider cove with a table saw?

Re: Wine Cabinet - IV

#35

Re: Stunning

HC Sakman

>Thanks Pat. It is done with a horizontal cove bit. A nasty beast of a router bit.

Chico...

Re: Wine Cabinet - IV

#36

Wow!!!!!

Stokes

>

Re: Wine Cabinet - IV

#37

Wow..Beautiful work!!

Mike in Paradise

>

Re: Wine Cabinet - IV

#38

I'm flabbergasted!

Jim Dillon

>Chico,

I'm frankly mesmerized by your piece. The detail is so well thought out and the use of contrast with the different woods is exceptionally well done. To paraphrase, one small step for man, one giant step for Chico. You should for sure send this in to FWW for inclusion in their Gallery section.

Maybe I missed it, but what wood did you use for the drawer sides?

Many thanks for taking the time to post some nice pics for us.

Jim

Re: Wine Cabinet - IV

#39

Dude!

Ernie Miller

>Where the heck did that come from? that is total eye candy. We all have somthing in a peice we make we don't like. what is it? You have put you self on a level that most of us only dream of acheiving.

Re: Wine Cabinet - IV

#40

You are like a fine wine.....

Thomas Skaggs, Foothills of Mount Level

>....you get better with age! :-)

Chico,

This piece is awesome. Top to bottom and inside out...it's all great! Terrific marriage of woods. The lines and proportions are right on. I'd say one of your best pieces ever!

Will you give it to me as a Secret Santa? ;-)

Tommy

Re: Wine Cabinet - IV

#42

Re: Wine Cabinet - IV

Bill Schreiber, Litchfield, NH

>Wow. Beautiful with that walnut burl.

Regards,

Bill

Re: Wine Cabinet - IV

#43

Re: Wine Cabinet - IV

Dave Morris

>Chico, I dunno if you'd remember me, but when I started woodworking I visited the old BP forum years ago. Life circumstances forced a change in hobbies/time allocation/priorities in life, and I'm just getting back into woodworking again. You were an inspiration to me back then, and I can see your craftsmanship has only improved with the passing of time.

As always, your work shows that the historians of tomorrow will have fine examples of 21st-century masterpieces to compare with the high-end "classics" displayed in museums today. Well done.

David

Re: Wine Cabinet - IV

#44

Re: Wine Cabinet - IV

Lynn Baker in snowy Glacier, WA

>Chico, you've done it again! Every time you post something new, I get more appreciation for your design and workmanship skills.

Great work as usual!

Best Regards

Lynn

Re: Wine Cabinet - IV

#45

I agree

Don in Northern Arizona

>Chico,

I usually learn more from your posts of your work than from any woodworking mag I subscribe to. This is a truly magnificent piece.

Don

Re: Wine Cabinet - IV

#46

Stunning! (as usual) and a question

Mike Farinella

>Impressive work Chico. Dumb question; where do you put the wine bottles? Are they laid horizontally?

Re: Wine Cabinet - IV

#47

Re: Inside of the WC-III

Michael Wangler in Rochester, NY

>Wow,

We don't buy good enough wine for a cabinet like that!

I love the combo of materials and colors.

Thanks much for sharing.

Great job.

Michael

Re: Wine Cabinet - IV

#48

Re: Wine Cabinet - IV Back

Robin Corell in Atacsadero CA

>Nice touch. I like unexpected detais like the lower apron on the back and the tapered center stile. I don't use ply so the backs on my work are similarly finished. It has never been a make/brake sale point but is always apriciated when it is noticed.

Robin Corell

Re: Wine Cabinet - IV

#49

Ooooh, La LA!!

Mike King, Sherwood Park, AB

>And many more adjectives, some of which are already used here, Chico!! Did anyone say 'You da MAN!' yet?

It's great to see you and others still at 'it'- keeping the faith, so to speak.. And like mentioned, we'll see this one in the FWW Mag gallery, I'm sure.

Me? I'm doing basement trim and cabinetry in oak. There's a mahogany cabinetry job in the wings as well, but it may have to wait till after the go-to-the-Lake season.