Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

OT - Need Network Help

Posts

OT - Need Network Help

#1

OT - Need Network Help

Pete Stahl from S. Jersey

>I took my wireless card out of my PC and put the Ethernet card back in but it won't work. I have a cable modem with a router connected. The PC I'm writing this with is using the router. When I plug the cable in the lights come on like it's getting a signal but if I go to Network Connections it says Network Cable Unplugged. PC is a Pentium 4 with a intel pro/100 ve Ethernet card running Windows XP. Any help would be appreciated.

thanks, Pete

Re: OT - Need Network Help

#2

Re: OT - Need Network Help

Bill Howatt

>You likely have no network connection setup that is using your wired Ethernet card. If it is there, does looking at the Properties of the connection help any?

Bill

Re: OT - Need Network Help

#3

Re: OT - Need Network Help

Pete Stahl from S. Jersey

>Bill, Not sure what you mean here. What does looking at the properties do?

Re: OT - Need Network Help

#4

Re: OT - Need Network Help

Bill Howatt

>You are right, it isn't that helpful. When you look at your network connections via the Control Panel is it there and does it say it is connected or disabled or...?

Is the cable firmly seated. Often they will seem like they are properly inserted but they aren't.

What does the Device Manager show for your network card in System Properties? Should not be any red X or yellow exclamation mark.

Have you tried running the Network Troubleshooter Wizard? It is listed on the left of the Network Connections Window and also likely accessable via the Help and Support item off the Start Menu.

Bill

Re: OT - Need Network Help

#5

Re: OT - Need Network Help

Pete Stahl from S. Jersey

>You are right, it isn't that helpful. When you look at your network connections via the Control Panel is it there and does it say it is connected or disabled or...?

ans: It say Enabled

Is the cable firmly seated. Often they will seem like they are properly inserted but they aren't.

ans: Cabled is seated firmly, if it weren't I don't think it would light up.

What does the Device Manager show for your network card in System Properties? Should not be any red X or yellow exclamation mark.

ans: There is no Red X or Yellow Exclamation Mark on it.

Have you tried running the Network Troubleshooter Wizard? It is listed on the left of the Network Connections Window and also likely accessable via the Help and Support item off the Start Menu.

ans: Tried that but it didn't work

I'll have to switch cards, maybe something happen to this one while it was sitting the box while I was using the wireless card.

Bill

Re: OT - Need Network Help

#6

Re: OT - Need Network Help

Tom

>Have you tried rebooting the computer, modem and router?

Re: OT - Need Network Help

#7

Re: OT - Need Network Help

Pete Stahl from S. Jersey

>Tom, Didn't restart Modem or Router. Thought it would be ok being the PC I'm writing this on works. I did uninstall ethernet device, reboot, let Windows reinstall and reboot again. Still get the red X.

Re: OT - Need Network Help

#8

Outside in....

Mark Goodall - ATL - tooljunkie

>Turn off all components, then turn them back on, from the outside in.

Modem - Router - PC

If you have your LAN network icon in the bottom right hand corner (system tray) right click it. Go to Status. You can also go to Repair and then to Status.

What is the exact status message?

Try each of the other 4 ports on the router.

Try another CAT5E cable.

Did you have anything funky before where the router was NOT issuing IP addresses (DHCP) and your laptop wireless NIC had a static IP address?

HAppy Woodworking!

Re: OT - Need Network Help

#9

Re: OT - Need Network Help

John McGaw

>The first thing I would do in a case as you describe would be to swap the two computers and see if the problem moves or if any symptoms change. If the problem moves then it is the computer. If the problem stays pat then the problem is the network. One can also play the same game swapping ethernet cables, router ports, and anything else where there are two or more choices.

Re: OT - Need Network Help

#10

Uncle...Uncle....

Pete Stahl from S. Jersey

>I give up. The card must be bad. I tried it in my Win 2000 computer and I couldn't find a driver it like on the system disk. I also put the wireless card back in the XP machine and it's still works. Must be something wrong with the Ethernet Card. I restarted everything, rebooted many times. What was weird or maybe not is when I moved the card to a different PCI slot it said it was ADMtek AN983 10/100 PCI Adapter not a Intel like before. I guess the intel is the generic if it can find a exact match??? Thanks everyone for all their help. May get a new card tomorrow as I need to pick up a ink cartridge, now I know why they give the printers away!

Re: OT - Need Network Help

#11

Network Card

Pete Stahl from S. Jersey

>What would be a good choice for a PCI Network Card for a Pentium 4 XP computer. Will also run Linux on it.

thanks, Pete

Re: OT - Need Network Help

#12

Re: Network Card

John McGaw

>Check to see what network cards your flavor of Linux supports natively and buy one of those. Windoze is not nearly so critical and almost anything standard will work there without a driver or will come with the appropriate drivers.

Re: OT - Need Network Help

#13

Name brand

Mark Goodall - ATL - tooljunkie

>I used to use Chinese no-name brand NICs to save a few bucks, then got wise and decided that spend an extra $4-$5 to get a Linksys, NetGear or D-link with that comes with a CD and has a real website with real drivers that were easily identifiable and easy to find was a good use of my money.

Happy Woodworking!