Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Hmmm... new rubber feet for a tool base

Posts

Hmmm... new rubber feet for a tool base

#1

Hmmm... new rubber feet for a tool base

Dave Morris

>I'm in the midst of restoring an older Jet Bandsaw, and one of the things it needed was some new "feet". You know, those little rubber pads the whole tool rests on where it contacts the floor. Of course, anything at the local stores isn't suitable--- not strong enough, or too rigid and not what I was looking for. Yeah, I could order some new feet from Jet, or probably any online tool source, but chances are they'd cost three times what the local stuff costs, and I'm trying to keep from throwing too much money at this saw restoration.

So I'm out playing "In Search Of..." for a few specific-sized bolts and widgets, and thought how it'd be nice to have a rubber mat in front of my workbench, cuz standing on the concrete ain't doing my own size 12 feets any good. Then it hit me-- that's exactly the type of material I'm in need of for the bandsaw stand's new shoes.

Long story short, picked up a 4' shop mat for my workbench at the comfy price of 6 bucks and change from the local Tractor Supply. Cut four small square pieces off one end, added the appropriate size bolts to attach them to the saw's base, and presto!... Five minutes later, my bandsaw's got some new shoes, and I *still* have a nice rubber mat in front of my workbench. Who cares if one side of the mat has a scar from a utility knife, the whole thing's gunna be covered in sawdust in no time anyway.

We'll see how this stuff holds up to the weight of the whole tool. If it doesn't, I'm not really out any money or time, and I can replace it later. If it does, so much the better, and I thought this might be worth passing on to others.

Dave--- heading back out to put the second coat of primer on the bandsaw's newly shod base

Re: Hmmm... new rubber feet for a tool base

#2

Re: Hmmm... new rubber feet for a tool base

Robert W. Henderson

>Hockey Pucks work well as feet. Cheap too.

Re: Hmmm... new rubber feet for a tool base

#3

Hockey Puck??? ... Wazzdat?

Dave Morris

>Picture this... small town so limited shopping options, 117� in the summer, snows maybe once every 5-6 years in the winter (and is gone in hours). The local Sporting Goods ain't exactly filled with Hockey equipment. No wonder I didn't consider something like that. ;-)

Dave--- who's never in his life even seen a Hockey Puck, unless you count that little black dot whizzing around on ESPN

Re: Hmmm... new rubber feet for a tool base

#4

Lee Gordon

Re: Hmmm... new rubber feet for a tool base

Lee Gordon

>I lost or destroyed one of the leveling feet for one of my mobile bases and I didn't want to pay whatever HTC would charge for a replacement plus shipping, so I bought a cheap all-metal foot at the Borg and then dipped it in Plasti-Dip. I think I gave it about 3 coats and when it was dry I screwed it into the base and it does the job.

Re: Hmmm... new rubber feet for a tool base

#5

JL

Re: Pieces of tire??

JL

>I figure you can always find some of those somewhere. Seems to me to be a bit tougher than the mats.

Re: Hmmm... new rubber feet for a tool base

#6

Re: Hockey Puck??? ... Wazzdat?

Fred West in West Chester, PA

>Dave, I have been playing hockey for the last 46 of my 51 years here on earth and ALWAYS have a couple of extra pucks lying around which I will gladly ship to you. :o) Fred

Re: Hmmm... new rubber feet for a tool base

#7

Re: Hmmm... new rubber feet for a tool base

Dave Morris

>Lee, I'd actually considered doing something like that, but didn't know if that tool-dip stuff would handle the weight. Nice to know it works for that application.

Dave-- who is also thinking about making some tool-dipped hangers out of some metal rod for the saw's power cord when it's not in use

Re: Hmmm... new rubber feet for a tool base

#8

Re: Hockey Puck??? ... Wazzdat?

Dave Morris

>Thanks Fred, I appreciate the offer, but I think I can probably find them locally if I decide these rubber feet don't feel solid enough. Of course, my wife might say it's just another excuse to be out pucking around in the shop. ;-)

Dave--- always open to finding new reasons to buy sporting goods