Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Finishing tips for Cypress?

Posts

Finishing tips for Cypress?

#1

Finishing tips for Cypress?

John Ergle in SC

>I'm thinking of using Cypress to build a fireplace mantle for the basement room I recently finished. Other than a few birdhouses, I've never used Cypress for any real furniture, so I'm not sure how it stains and finishes. Any tips from those who have used Cypress in the past?

Re: Finishing tips for Cypress?

#2

Re: Finishing tips for Cypress?

Ken Oakley-Sunny St. Cloud, Fla.

>From my experience with cypress it takes stain, mostly Minwax, very well and as with most of my projects I use Deft Brushon lacquer as the finish. I prefer spraying the lacquer on with a spray gun.

Re: Finishing tips for Cypress?

#3

Re: Finishing tips for Cypress?

Jim Dillon

>John,

As far as I know, there are no special issues regarding finishing cypress. I've used a stain for outdoor furniture and it went on just fine, even in very hot weather. Do a search on WoodCentral for January 31, 2007 to the thread starting with "Cypress for Woodworking" by Joe Pack. There is a nice picture in that thread of a clear finish on a cypress dresser built by Clint Searl. Good luck.

Jim

Re: Finishing tips for Cypress?

#4

Re: Finishing tips for Cypress?

Clint Searl, at the base of Haycock Mtn

>The dresser was finished with water borne poly. I have also used oil based poly, which also works well and imparts a slight amber cast that looks good on cypress. On another project, I used ZAR stain under water borne poly, and it turned out well. It's nice wood.

Clint