Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Any experience with Leopardwood?

Posts

Any experience with Leopardwood?

#1

Bart Goldberg

Any experience with Leopardwood?

Bart Goldberg

>I am going to be building a desk for a friend's daughter (11 yo). She saw a piece of Leopardwood, and asked if I could make the top of her desk with it. I have access locally, so getting it is not an issue. Any reason not to use this highly figured wood for a desk top?

Thanks

Bart

P.S. Remove the 2 to reply

Re: Any experience with Leopardwood?

#2

ebd

Re: Any experience with Leopardwood?

ebd

>Piratinera guianensis (syn. Brosimum guianense) (common names: snakewood, letterwood, letterhout, leopardwood, amourette, gaetado, palo de oro, burokoro, cacique carey, speckled wood)

Drying can be difficult and there may be warping & degrade. Medium movement in use. High resin content can resist surface finishes (wipe with solvent first). Oil & wax produce a fine lustre.

Reference: "Wood for Woodturners" by Mark Baker, PP. 96-97.

Re: Any experience with Leopardwood?

#3

Re: Any experience with Leopardwood?

markfromsacramento

>I've seen lacewood advertised as leopardwood on the internet (usually lacewood with the most figure). I don't know whether there are working differences between the two but I do know that lacewood is fairly difficult with some tearout on the wildly figured pieces. I've also found that it is sometimes sold not completely dry (thus cupping if resawn).

Re: Any experience with Leopardwood?

#4

Bart Goldberg

Re: Any experience with Leopardwood?

Bart Goldberg

>I checked the moisture content with my meter and its showing 6%. I think I'm safe from any incomplete drying concerns. I wouldn't be resawing these boards - They are 4/4 and I'd be making a panel glue up of around 5 boards to get a 30" wide desk top.

Thanks

Bart