Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Cabinet Scrapers, Help for what ails you *LINK*

Posts

Cabinet Scrapers, Help for what ails you *LINK*

#1

Cabinet Scrapers, Help for what ails you *LINK*

Peter Galbert

>I've posted some tips on some of the problems and cures that I've encountered with the all powerful scraper.


img

Chair Notes

Re: Cabinet Scrapers, Help for what ails you *LINK*

#2

Re: Cabinet Scrapers, Help for what ails you

Robert R Clough - Thorncraft

>I'm trying, Peter. I prefer to use a holder and I have two, one is the standard fixed type and the other is a scraper plane. So far I have been able to make small shavings - and was I pleased when that happened! I have also found that, even with dust only, the wood is still smoother. Therefore, I did not stop bust persevered (I love that word) and shall continue to.

Re: Cabinet Scrapers, Help for what ails you *LINK*

#3

Re: Cabinet Scrapers, Help for what ails you

Tony Augruso

>Thanks. Very useful information on your site.

Re: Cabinet Scrapers, Help for what ails you *LINK*

#4

Re: Cabinet Scrapers, Help for what ails you

Peter Galbert

>Sounds like you're on the right track, but I'd encourage you to lose the holder for a bit and try simply filing the edge as I spoke of in the entry.The file will leave a ragged but sharp edge, play with it.Later when you do hone it and turn a burr, you'll find that the angle at which the burr is turned, as well as its size, will greatly affect its use, and the holder might not allow you to find the best position for your burr. I'll touch more on this soon in another post.

Re: Cabinet Scrapers, Help for what ails you *LINK*

#5

Re: Cabinet Scrapers, Help for what ails you

Robert R Clough - Thorncraft

>Perhaps you misunderstood me, Peter. I do file the scrapers more or less freehand. I do not use a holder for either the scraper or the file, although I have one.

No, I meant the actual scraping. There I find I cannot, not don't want to, but cannot use a scraper without a holder of some sort. As long ass ity works, that's all I care.