Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

OT - Printer, Copier, Scanner recomendations

Posts

OT - Printer, Copier, Scanner recomendations

#1

OT - Printer, Copier, Scanner recomendations

Mark Kauder, Phenix City, AL

>My trusty HP PSC759xi has died, and I am looking for recomendations from any of you on what I should look at.

I went to my local Cartridge World, where I get cartridges refilled, and they said that the Lexmark/Dells are prone to clogging when they are not used regularly. They recommended HP, but if I could stay away from models that use cartridge series' #20 & #90 because they have very small ink capacity.

My current model has the big #78 (Color) and #15 (black) cartridges, but it looks like the current PSCs do not used that series. I have 4 full ones of each. Lucily, Cartridge World will take them back for credit.

So, anybody?

Mark

Re: OT - Printer, Copier, Scanner recomendations

#2

Does it need to be color?

Hoa Dinh in Alameda

>I suggest a B/W laser unit.

If you need to print colored photos, buy an inkjet printer just for that.

-- Hoa

Re: OT - Printer, Copier, Scanner recomendations

#3

Re: OT - Printer, Copier, Scanner recomendations

Robert Hutchins

>Hi Mark!

We recently bought an HP Deskject Model 335 All in One Printer-Copier-Scanner at wallyworld for $50. It gets very light use but seems to perform well at scanning and printing. Haven't had it long enough to know if it will last.

HTH

Re: OT - Printer, Copier, Scanner recomendations

#4

Re: OT - Printer, Copier, Scanner recomendations

Ron in Drums PA

>I never cared for all-in-one machines, but I know desktop real estate is sometimes a premium.

About three months ago I purchased this HP Color Laser Jet printer to replace the one we had before. The kids got about 7000 prints on the old one before the toner died. They did everything from pictures from their digital cameras to their school reports.

Sad thing is, I found it cheaper to purchase a new printer than to replace the toner cartridges. How much would it cost to print 7000 copies with a inkjet?

Be warned, this laser print is a behemoth.

Add a desktop scanner for about $100-$150 and you are all set.

Re: OT - Printer, Copier, Scanner recomendations

#5

Re: OT - NOT HP

Robin Corell in Atacsadero CA

>I have an HP office jet 6210 all in one and based on my experiance with it and the terrible HP customer service (took three machines to get one that would work) I will NEVER own anything made by HP ever again in my lifetime.

Robin Corell

Re: OT - Printer, Copier, Scanner recomendations

#6

Re: OT - Printer, Copier, Scanner recomendations

Howard Norman-Prescott, AZ

>Mark, I am not a fan of all-in-ones but I know that they do save space which sometimes dictates that you use them. I presently use an Epson scanner and have both a HP B/W laser printer and a HP inkjet for color. The laser printer is so much better for B/W printing than an inkjet.

Howard

Re: OT - Printer, Copier, Scanner recomendations

#7

Re: OT - Printer, Copier, Scanner recomendations

Mark Kauder, Phenix City, AL

>Hi Ron,

Thanks for that thought. I had not really thought about option recently.

Tell me, what about the expendables? How often (if yet) do you have change cartriges? They run about $75 each, and if they are like their HP big brother's that we have in offices at work, there is an imaging drum that has to be replaced occasionally.

I have an Epson Photo printer, so I will not be doing many photos.

I do have a 16yr old at home doing school projects.

Mark

Re: OT - Printer, Copier, Scanner recomendations

#8

HP3210

Dominic Greco in Richboro PA

>Mark,

Not sure if this fits your criteria because I think this printer DOES take the #2 size cartridges.

But last year just before the holidays I purchased a Hewlett Packard 3210 Photo Printer from Amazon.com. So far I really like it. It can produce some really stunning photos and work very well as a scanner and copier. Plus I think I got mine for $187.

The real test was my wife. She is very hard on any type of electronic gadget that falls into her reach. I'm glad to say that she endorses this printer as well. It's easy to use and hooked right up to her computer with no problems what so ever. While we bought it for photos, she uses it more as a copier than anything.

Just as an aside, my wife tends to print color photos and copy a lot in black and white. So far, I've only recently needed to replace the black and yellow cartridge.

Dominic

Re: OT - Printer, Copier, Scanner recomendations

#9

Re: OT - NOT HP

Kirk (KC) Constable

>Daddy-in-law got a new Dell with Vista. The HP printer has finally decided it's 'installed and operating properly', but it won't print. The HP camera software won't load, and the linky to HP updates say there aren't any. I kinda almost wish he had something else HP just to see if IT would work.

KC

Re: OT - Printer, Copier, Scanner recomendations

#10

HP 3050, 3052, 3055

Mark Goodall - ATL - tooljunkie

>I've setup up quite a few of these new series and people really like them. They aer B&W LaserJet printers.

I hate having to install anything other than HP printers, because compared to Brother, Canon, Lexmark, Dell, Kyocera, Minolta..... the HP's setup is hasslefree and customer support, which is rarely needed, is good. With the other manufactures my experiences have almost consistanly been terrible.

Happy Woodworking!

Re: OT - Printer, Copier, Scanner recomendations

#11

Not to be contrary....

Tony - Memphis

>I have the HP 6210 and it has been a great device for us. We use one here at the office too. The last two HP's I've owned were great too. They are still going. To qualify, I am not a heavy user. I print a few pages a week and a few photos. I have been real impressed with how well the photos come out. The printer here in the office is mainly used as a fax machine and it has performed very well even though it gets abused.

Tony

Re: OT - Printer, Copier, Scanner recomendations

#12

Re: OT - Printer, Copier, Scanner recomendations

Ron in Drums PA

>Mark

The last color laser printer lasted a few years and was retired because it was cheaper to buy a new printer then replace the toner.

The 7000+ prints where from the original cartridges. The yield was supposed to be 6000. There was two other replaceable parts, one had about 10% usage left the other still had 90% usage left. These also where original parts.

The nice thing about laser jets is there are no heads to clog... ever!

The HP 3600n is on sale for $400, thats $200 less then when I purchased it.

Another nice thing about this printer is that it is networkable. Between two teenagers who each use have their own desktop and me on a wireless laptop, that is a major plus.

Finally, color photos form a laser printer are way better than a inkjet.

Re: OT - Printer, Copier, Scanner recomendations

#13

Re: Not to be contrary....

Ron in Drums PA

>Ditto

Over the years I've owned a dozen or two HP printers of all shapes and sizes. To me they are work horses and would not hesitate buying from them again

Re: OT - Printer, Copier, Scanner recomendations

#14

Good news & bad news

Jerry Nicholson

>The good news is that HP's customer support is probably right up there among the best you get for that type of hardware. The bad news, from my experience, is that HP's customer support really SUCKS!!

Jerry

Re: OT - Printer, Copier, Scanner recomendations

#15

Good news

Ron in Drums PA

>I have a 36" wide HP inkjet printer that is 8 years old and needed a belt replaced. I was on their website looking to see if the part was even available when a window popped up.

Now I'm pretty cranky when it comes to pop ups and have software installed to prevent such things from happening on my systems. So you could imagine my surprise when showed up!

It was HP Customer Service asking me if I wanted a to "Chat" with a customer service person. Curious, I clicked on the yes button to see what would happen. Immediately, CS showed up and asked me what I was looking for. I gave him the model# and explained the part I was looking for and he told me to wait a moment.

About a minute later he returns with a link for my part and asks me if this is what I was looking for. It was and I was able to place the order immediately. Total time was only a few minutes - five tops. $18 and two days later the belt arrived.

I was very happy with the service I received.

Re: OT - Printer, Copier, Scanner recomendations

#16

Monochrome MFD *LINK*

Curt Harms

>We had a Sharp inkjet MFD that was way too hard on ink cartridges at $50/pop. I wanted an MFD with integral networking. Decided to take a shot with Brother. Bought an MFC 7820N, brought it home, hooked it up to the wireless router, installed the software on 3 computers and it works. The software isn't the greatest by itself, but I use Serif Pageplus to create PDF's and to manage scanning. I thought it was SO cool to be able to scan and manage documents from my easy chair, but then I'm easily impressed. I did have one issue with network connectivity after owning it for a while. I called Brother and got it resolved quickly. I'm happy with it, and the price was right at around $265.

Curt


Brother 7820N