Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

finishing question

Posts

finishing question

#1

finishing question

Jeff H. Oregon

>Need some help in finishing a cherry bed I built. My wife does not want it to be shiny so no polyurethane. What finish can I use that would be very durable but yet very little shine.

I considered shellac but have never used so not sure how this looks dried.

Any help appreciated.

Re: finishing question

#2

Re: finishing question

Charles Sharp

>Go ahead and use the poly, then rub the finish with steel wool.

Re: finishing question

#3

Re: finishing question

Tom Stockton

>Start with satin poly or use satin gel varnish. If you use the poly just put on a couple of thin coats with a rag.

Tom

Re: finishing question

#4

Re: finishing question

NickB

>You can use shellac, just use 2, maybe three coats (more if you are wiping on). Shellac doesn't start to get shiny until you've built enough of a coat. Dries fast, non-stinky, and can be recoated in a snap (can also be reduced/removed with alcohol). I really like unstained cherry with blond shellac (Zinsser SealCoat is great-if you use the regular canned shellac, check the date on the can to be sure it is fresh). If you do use shellac, avoid using any alkaline cleaners (e.g., ammonia-based), as shellac is very susceptible to alkaline attack.

To quote (roughly, but I'm pretty sure this is right) Michael Dresdner, "fantastic finishers frequently finish firewood." In other words, whatever you're thinking of, try it on some scrap (like some offcuts from your project) and show them to your client (wife).

Hope this helps,

Nick

Re: finishing question

#5

Make it easy....

Clint Searl, at the base of Haycock Mtn

>on yourself and foolproof, to boot. Use a good water borne poly, like Varathane, in satin or semi-gloss sheen. Three coats, rubbing with a maroon pad between coats; finishing with Butchers Wax, or not.

Clint