Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Shop-built "old-style" -tool box

Posts

Shop-built "old-style" -tool box

#1

Shop-built "old-style" -tool box

Howard In Toronto

>Hi all -

What are the best proportions for the type of shop-built "old-style" toolbox?

I mean the kind a mechanic would make with the gables that slope toward each other and the carrying handle would be a dowel or pipe.

Made one a few years back but it's too deep because the dowel handle is too close to get my hands in comfortably.

I want to make this one with my youngest as soon as shop-weather starts.

Thank you.

Howard

Re: Shop-built "old-style" -tool box

#2

Re: Shop-built "old-style" -tool box

Al Stokka - Cambridge, Iowa

>The plan I have (from a document named Kansas 4-H Woodworking Plans available here: www.oznet.ksu.edu/library/4h_y2/4h167.pdf ) is called a nail box, however, I think it will work for you by omitting the partitions. It is 10 1/2" W x 14 1/2" L x 6" high ends and 3" high sides. The handle is 1 1/2 " from the top to the centerline of the dowel handle. Funny, I hadn't noticed until today the the dowel isn't listed in the material list.

Re: Shop-built "old-style" -tool box

#3

What Do You Plan to Put in It?

Robert Hutchins

>Instead of relying on plans or dimensions, I'd give some thought to what I was going to put in it then adapt the plans to 'fit'. For example, is the box to accommodate one, or more, handsaws? What about handplanes? Framing square (the hardest to 'fit' IME) Hammers? Draw knive? Chisels? Screwdrivers? Does it need a lid for locking? You get the drift. Figure out what you want in the box, then layout those tools on your bench (or the living room floor) in a manner that appeals then figure out the dimensions you want based on where you would grip the handle.

This worked for me on more than one tool carrier.

Re: Shop-built "old-style" -tool box

#4

Al and Robert - Thank You

Howard In Toronto

>It's going to be a project my nine-year-old and I to do together when Toronto (FINALLY) warms up enough to work in the shop.

I'm using reclaimed pine from shipping crates that held a pair of MASSIVE condenser coils.

It'll be an opportunity to show him the magic of -

- jointing the faces with a planer using a sled

- jointing the edge on a router table

- my all-time favourite - how (the right amount of) glue is all you need to make wider boards.

(Seeing all my projects are made of MDF, d'ya think I should just break down and buy a jointer??)

His tool collection currently stands at -

- coping saw and blades

- egg-beater hand drill and bits

- ratcheting screwdriver and huge assortment of heads

- block plane

- mitre box and saw

(D'ya get the impression my gifts are immediately recognizable at Hanukah?)

Haven't bought him chisels yet or handsaws that don't have their own guides!

But - he does have an especial interest in knives....

Thank you.

Howard

Re: Shop-built "old-style" -tool box

#5

Might Be a Good Time to Plan His Next

Robert Hutchins

>acquisitions. Figure on his getting some chisels or whatever and incorporate that into the design of his box. He will be immense satisfaction later when he gets them and already has a place for them.

Mazel tov!

Re: Shop-built "old-style" -tool box

#6

Here Are a Couple

Mike Fitterling

>I made the large one of these for myself and the smaller one for my son. They have come in very handy. The bigger one measures 9" wide, 19" long, 11�" high altogether, and 8" high to the top of the box section. I made a shallow tray for this one that rests on cleats. The smaller is 7�" wide, 14" long, 11" high all together, and 6" high at the top of the box section. Good luck with yours.

Mike


img

Re: Shop-built "old-style" -tool box

#7

Re: Shop-built "old-style" -tool box

Michael Wangler in Rochester, NY

>Howard,

Here is one I built. The main box is about 19" x 6" x 5" high.

I added the side box after to hold small items. This addition made the box more useful.

Have fun,

Michael


img