Re: OT - Digital Camera Question *LINK*
Jim Dillon
>Howard,
16x20 might be pushing your luck a bit with a 4MP camera. Then again it never hurts to try. To go that large, you will have to resample your image to roughly 100 ppi (pixels per inch) assuming a 2000 x 2000 ppi original image. That 100 ppi puts you at about newspaper quality. Normal printing is done around 300-360 ppi (depending on the native resolution of the printer). But as others have said, viewing distance (up close and personal or from the next room), the type of paper (matte or glossy), the type of printing (inkjet vs other), the brand of printer (Epson vs HP for example), and the image software being used, all play a role.
Or you can set your resolution to something like 200 ppi and upsample (interpolate) to your final size. Both Genuine Fractals and Qimage are thought highly of for getting bigger pics using interpolation algorithms. There are also good freebie multi-step image resizers out there - if you have Photoshop.
Having said all this, I would try some matte paper (hides the loss in resolution better), adjust your resolution (using either method) and go for it. You should be able to get a reasonable 8x10 and luck might be with you for getting a larger one. I think Qimage (www.ddisoftware.com) has a free demo that might be useful. Below is one link (of many) that discusses resizing. Good luck.
Jim
Image Resizing