Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

shellac and topcoats

Posts

shellac and topcoats

#1

shellac and topcoats

tatwood

>Please forgive me if I'm asking something already answered. I do complicated decoupage on wood projects and am working on a commissioned silver chest. The design wanted was quite thick, and so I have so far put on about 16 coats of Bull's Eye clear shellac (waxed) and then have sprayed on several coats of aerosol clear shellac (unwaxed). What can I use for a waterproof topcoat? Would Waterlox work?

Also, for future projects I'm considering Envirotex Polymer Epoxy. The label says that one coat, poured on, equals 50 coats of polyurethane. Does anyone have experience with this product?

Thank you!

Re: shellac and topcoats

#2

Re: shellac and topcoats

Clint Searl, at the base of Haycock Mtn

>Since you have used shellac, which may react poorly with a waterborne top coat, I recommend a solvent based acrylic lacquer, sprayable if you have the equipment or brushable like Deft. Both types will provide protection and are compatible with shellac.

I have used both water borne poly and solvent lacquer to adhere cloth and paper decoupage, and as a top coat. The poly is easier and can also be topped with solvent lacquer.

Clint

Re: shellac and topcoats

#3

Re: shellac and topcoats

Glenn Madsen near San Francisco

>a comment on shellac:

Waxy shellac is a fine finish, with much to recommend it. But if you plan on topcoating, use the dewaxed versions. Whether your overcoats with the dewaxed are sufficient, I don't know. But the waxy version, in my opinion, reduces your chances somewhat.