Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

WWJ 23 ga. pin nailer review

Posts

WWJ 23 ga. pin nailer review

#1

WWJ 23 ga. pin nailer review

Terry Alexander

>Did anybody catch the review on the 23 ga. pin nailers in this month's WWJ?

I have a 16 ga. and an 18 ga. AND.....am always looking to add more firepower to my aresnal ;-)

Do any of you have a 23 ga. pin nailer?

Comments/suggestions?

TIA

Terry Alexander

Re: WWJ 23 ga. pin nailer review

#2

Re: WWJ 23 ga. pin nailer review

Gary Ratajczak

>I bought one of the Grex units - shoots up to 1-3/16" I believe. Ran about $175.00. Used it on my bathroom re-model - worked terrific.

No recoil, and very hard to find any hole to fill.

Re: WWJ 23 ga. pin nailer review

#3

Re: WWJ 23 ga. pin nailer review

John in Kerrville

>I bought one of th $59 jobbies from Harbor Freight...the pins cost almost as much as the gun. The only drawback to it was the "hammer" part leaves too big of a hole. I kept playing around with pressure and modifying it until I was satisfied with the results.

I matched some trim from a hallway and added it to kitchen cabinets for a customer. Not sure it was worth the time it took to do the mods, but at least it did what I wanted. Did I mention that I am a tightwad?

john

Re: WWJ 23 ga. pin nailer review

#4

Senco FP10 here

Tim Greif - West of Chicago

>I've had the Senco FP10 for a couple years. Good little tool. I've used it primarily for molding and picture frames. Drives 3/4" pins easily into oak. Very good for those applications and the pins are virtually invisible. Kinda pricy, but I'd buy it again. No misfires.

Re: WWJ 23 ga. pin nailer review

#5

Re: WWJ 23 ga. pin nailer review

JW

>I have the porter cable PC100. Not too happy with it because it leaves a dent about 95% of the time whenever I shoot pins into softwood. And the dent is quite noticible. Hardwood is ok. Doesn't dent as much. Tried pinning it with less downward hand pressure. It helps a little but doen't really solve the problem.

But the pins are always set at the right depth.

my 2 cents

Re: WWJ 23 ga. pin nailer review

#6

Re: WWJ 23 ga. pin nailer review

NickB

>There was a review in the Journal of Light Construction (JLC) sometime last year too. Cadex and Grex I think were the top picks. Cadex recently came out with a model that will shoot 2" pins, but I have trouble thinking of a situation in which I would need a 2" pin (maybe it's just me, but when the fastener gets that long, I think I want something a bit heavier than 23 ga.).

NickB

Re: WWJ 23 ga. pin nailer review

#7

Re: WWJ 23 ga. pin nailer review

Bruce Mack

>My Porter Cable pin nailer also left dents, and did not set the pins as deeply as I wanted. I used a fine file to flatten the rounded tip of the gun. This resulted in more surface on the wood and less denting. Of course the driver pin protrudes a little more when fired, and the pin goes sufficiently deep now.

Re: WWJ 23 ga. pin nailer review

#8

Happy With My Harbor Freight Model *LINK*

Dave's Not Here

>I also have the Harbor Freight pin nailer and so far I haven't had any of the problems John experienced. I might have a different nailer than John has as I only paid $16.99 on sale for mine. As my needs for a pin nailer are few and far between this one has worked out well for me.

One of the features that I like is that it has a slide bar that you set based on the length of the pin the that you're using. Regardless of the size of the pin being used the operating psi stays constant at 90psi.


Harbor Freight Pin Nailer

Re: WWJ 23 ga. pin nailer review

#9

Re: WWJ 23 ga. pin nailer review

ScottS

>I bought the Grex P635; the one that shoots pins up to 1-3/8ths inch long. At the time, I think it had received the best reviews and it also shot the longest pins. Haven't used it on any big projects yet, but it's been fantastic on everything I've tried. I was a bit dubious about the holding power of 23ga headless pins, but after seeing a demo at woodworking show I bought one on the spot. The newer P645 will shoot even longers pins (1.75", IIRC).

Re: WWJ 23 ga. pin nailer review

#10

Bostich

Joe Piotrowski - Chicago Burb's

>I sure the gun for almost 200 is nice but I paid like 90 for mine on sale at menards.

use it for a lot of small trim and it's great. no problem. if you are shotting 1000 nails a week or a month maybe the better models are required.

I know someone who likes there Harbor freight nail guns. me personally I don't like buying low end tools but I will buy mid level. they last long enough for my usage and are easier on the wallet to replace.

Re: WWJ 23 ga. pin nailer review

#11

Re: WWJ 23 ga. pin nailer review

del schisler

>doesn't it come with a rubber piece for the piece that goes on the wood that get's pushed down? i have the PORTER CABLE - 18 GAUGE BRAD NAILER Model BN125A and it has the rubber their And you can set the depth of the brad's also I shoot the brad's into a scrap piece tell i get the set that i like Mine work's very well