Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Parts for Old Homelite chainsaw's

Posts

Parts for Old Homelite chainsaw's

#1

Parts for Old Homelite chainsaw's

Ken

>Hello,hope i'm in the right section.I have an old homelite chainsaw that was made in the mid to late 70's.It was given to me and is in great condition w/a 22" bar and it is a real power house except for one small thing.It need's a carb.kit as the diafram is shot.They don't list them anywhere,but I am hopeing that someone may know of a source that may carry them or even know of a later model carb that would work.Any help would be greatly appreciated and you can email me if you have something in mind.I have a few folk's that are looking,but so far no luck.

Thanks for any help

Ken

Re: Parts for Old Homelite chainsaw's

#2

Re: Parts for Old Homelite chainsaw's

del schisler

>check here You didn't list a part number Or model of the chain saw i bet it is white Their should be a carb. for it

http://www.jackssmallengines.com/searchdb2.cfm

Re: Parts for Old Homelite chainsaw's

#3

Re: Parts for Old Homelite chainsaw's

Ken

>Thanks,I went to this site and called,but all they could do is pull up the part # on the internet and look for it and they couldn't find anything.Here is the total breakdown.It is a C-72 model,it has two set's of numbers on the tag on the saw it's self.One is 100-272 and the ser # is 190410130.The Carb is a tillotson made in tolido O.The # on the card is HL 141D-850.This saw was made in the mid to late 70's.I think what I will need is some repairman that know's about these saw's that may know where to get part's for them.Hope this get's me some help.DESPERATE (HELP)

Ken

Re: Parts for Old Homelite chainsaw's

#4

Re: Parts for Old Homelite chainsaw's

BilWil

>I would go to http://www.arboristsite.com/ and then go to the equipment section and select the chain saw forum. You'll have to register to post, but these guys should be able to help. They were valuable to me.

Re: Parts for Old Homelite chainsaw's

#5

Re: Parts for Old Homelite chainsaw's

Al Stokka - Cambridge, Iowa

>Ken,

First, I have not dealt with these folks, so you're on your own in that respect...

K&T Sawshop:

http://www.mymowerparts.com/partslist/1055/1107.php

page listing Tillotson carburator kit (catalog number 1551):

http://www.mymowerparts.com/partslist/1055/1107.php

Al

Re: Parts for Old Homelite chainsaw's

#6

Re: Parts for Old Homelite chainsaw's

Jeffrey D. Rose

>Ken,

Another place to try is http://www.m-and-d.com I have had really good luck with them getting parts for my homelite 240.

Jeff in Iowa.

Re: Parts for Old Homelite chainsaw's

#7

Re: Parts for Old Homelite chainsaw's

Ken

>Thanks folk's I appreciate all the info,look's like i'll be runnin up the old cell phone min.in the next few day's.

Thanks again

Ken