Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Where Do You Get Your Impact Driver Sockets?

Posts

Where Do You Get Your Impact Driver Sockets?

#1

Where Do You Get Your Impact Driver Sockets?

Robert Hutchins

>My Makita 14.4 cordless drill, impact driver, and flashlight kit came today (meep, meep). I've never owned an impact driver 'til now. The instruction pamphlet shows indented-shank bits and sockets. I recall seeing the bits various places, but where have you guys bought the sockets. Do they come in sets? What sizes should I keep handy? Wonder why Makita doesn't include a set of both SAE and metric sizes with the package.

Re: Where Do You Get Your Impact Driver Sockets?

#2

I just use sockets...

John in New Mexico

>Mostly since I don't drive hex heads much. I've just got a couple of ball detent drivers that take 1/4" and 3/8" square drive sockets. Impact drivers are great for long drywall and deck screws, the 3 inchers that I use for everything but drywall or decks :). The only trouble is that most phillips bits either break after a while or wear quickly and start to cam out. I prefer the ones that break, as then I can't say "I'll just finish the job and then replace the bit".

John

Re: Where Do You Get Your Impact Driver Sockets?

#3

Re: Where Do You Get Your Impact Driver Sockets?

Howard Norman-Prescott, AZ

>I have the Makita 14.4 v impact driver also. I have just used standard six side sockets and have never broken one yet. Maybe tomorrow now I will break a couple but so far I haven't broken one. I do have a set of half inch drive impact sockets for an air impact wrench that I have had for 20 or so years. I bought those from Sears 20 years ago.

Re: Where Do You Get Your Impact Driver Sockets?

#4

Thanks, Guys!

Robert Hutchins

>I see now that there is a hex shank for holding regular sockets. Why Makita didn't include a 1/4" and a 3/8' drive shank in the package is beyond me. More than $200 spent for the tools now I have to track down or wait for delivery of a $5 accessory to make the impact driver usable.

Oh well! Another excuse to go to a tool store, but I have to drive an hour or 2 to get to one. I wonder if I can find some hex shank Torx bits?

Thanks again.

BobH

Re: Where Do You Get Your Impact Driver Sockets?

#5

Re: Thanks, Guys!

Rob Sandow

>Just don't use regular sockets. They are hardened and may shatter under impact driver duty. A set of impact driver sockets made of mild steel that won't shatter is very cheap and may save your life.

Rob

Re: Where Do You Get Your Impact Driver Sockets?

#6

Re: Thanks, Guys!

Barry Irby

>I bought a small accessory set for mine for about ten bucks. Its in a little "three fold" plastic case and has a variety of drivers including Torx, hex, straight, and Phillips, and square drive. I see much larger sets with more than a hundred drivers in them, but mine has about twenty five.

I think there are a variety of the quality of drivers varies widely. The ones carried by the borgs may not be as good as some carried by industrial fastener suppliers. I don't know how to sort this out or if there is a "Spec" that will tell you which ones are the "good ones".

I do know that it is very important that the Phillips bits you use EXACTLY fit the screws. And there is a variety of types and shapes. Very frustrating to get to the job and find you have the wrong philips bits.

Re: Where Do You Get Your Impact Driver Sockets?

#7

Not too likely, Rob

Jason Roehl in Mulberry, IN

>...that an impact DRIVER would shatter a regular socket. The battery-powered driver Robert is talking about is probably less than 100 ft-lbs. As a rule, I try to use impact sockets with my impact WRENCH (closer to 600 ft-lbs), but I've even used regular sockets with that in a pinch on numerous occasions and still haven't shattered one.

Just my experience.

Jason

Re: Where Do You Get Your Impact Driver Sockets?

#8

Harbor Freight *LINK*

Dustmaker Mike

>I use these types cause if I mess them up I am not out a lot of money. I have hammered on them heated them with a torch and tossed a few after beatting on them to get a Bolt broke free. Nothing fancy just useful.


Deep Well Sockets

Re: Where Do You Get Your Impact Driver Sockets?

#9

Found Set of 3 Hex Drive Adaptors-Harbor Freight

Robert Hutchins

>1/4", 3/8", 1/2" drive on hex shanks that fit my new toy... uh, er... TOOL! perfectly.

Thanks again, gentlemen!

Re: Where Do You Get Your Impact Driver Sockets?

#10

Didn't See Them When I was There

Robert Hutchins

>awhile ago, but will look on the next trip.

Thanks, Mike!

Re: Where Do You Get Your Impact Driver Sockets?

#11

Re: Harbor Freight

Dave Chatham

>Hey Dustmaker,

Read the ad closer, lifetime warranty. Don't toss those babies, take them to Horrible Fright and have them give you a new set. After all, what good is a bargain if you can't get free replacements! With dollar cost averaging the sockets are down to $5 a set after replacement, on the 10th trip back they are only a buck! Just like Sears only cheaper, and they probably still make money on them.

Dave

Re: Where Do You Get Your Impact Driver Sockets?

#12

Re: Harbor Freight

Dave Chatham

>Oops, Forgot to mention I get them on sale $9.99

Dave