Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

OT: Rain Gutters

Posts

OT: Rain Gutters

#1

OT: Rain Gutters

Mark Kauder, Phenix City, AL

>What is the proper slope on rain gutters?

Mark

Re: OT: Rain Gutters

#2

Re: OT: Rain Gutters

Barry Irby

>About 1/8" per foot would be excellent, but you will probably have trouble getting it. I think the answer is "any" slope would be good. A 1/16" per foot is more likely.

Locally, I watched a guy install gutters by himself. He rolled out a piece of continuous gutter close to forty feet long. Put end caps on the ends and "drops" for downspouts. He knew the piece was the right length. He put a ruler in both ends, sticking "up". With his ladder in the center, he walked up the ladder and put a single spike right in the center, holding the gutter as high as he could. Then he went to both ends and spiked it as low as practical. (About 1 1/2" slope over 20 feet) Then he filled in between with more spikes. The rulers allowed him to center the gutter by acting as stops on the ends. I was amazed that he worked this way all the time. I would have thought it almost impossible and he made it look easy.

Re: OT: Rain Gutters

#3

Re: OT: Rain Gutters

Mark Kauder, Phenix City, AL

>Barry,

As always, a fount of information. Thanks. That is about what I thought. This is for my shop expansion area. The rain coming off the new roof is eroding the ground underneath.

I can get an inch in 10' so I should be good.

Thanks,

Mark