Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Local Saw Blade Sharpening

Posts

Local Saw Blade Sharpening

#1

Local Saw Blade Sharpening

Allen Bryant - Bumpass, VA

>I'm finding myself in a bit of a pickle. Most of my table saw blades are in need of a good sharpening. I do have a spare Forest WWII blade to put on the saw, but this leaves me with no spare, plus my Dado blade actualy needs a few teeth repaired after hitting a nail with it. (How the planer, jointer and regular blade missed the nail I'll never know) Does anybody have any recomendations on a good sharpening service in the Richmond, VA area?

Re: Local Saw Blade Sharpening

#2

Re: Local Saw Blade Sharpening

Warren Muse, Earlysville VA

>Allen,

Try Raymar Grinding in Fishersville.(540) 337-1002

They pickup and deliver at least as far East as Charlottesville. One or two pieces no problem.

Excellent work. No personal affiliation except as a customer.

W

Re: Local Saw Blade Sharpening

#3

Re: Local Saw Blade Sharpening

David Yoho

>Allen, I don't know anyone I'd trust my blades to in Richmond. I've always sent them back to Forrest and the turn around time wasn't bad.

David

Re: Local Saw Blade Sharpening

#4

Re: Local Saw Blade Sharpening

Barry Irby

>I agree with David. Over the years I have trusted my various blades to several local sharpening services and what I got back only bore a poor and vague resemblance to what I bought originally. (I once sent out a hollow ground blade and they set it and sent it back. Cut quality was about like a chain saw.) I have had such poor results I usually just "retire" my dull blades. I will be sending mine to Forrest in the future. Note: I actually have no experience with current local saw sharpening services and if an excellent one really exits, I am not aware of it.

Re: Local Saw Blade Sharpening

#5

true enough...

Warren Muse, Earlysville VA

>I once took a carbide blade to a hardware store that advertised "expert sharpening". It was returned with the SIDES (only) ground off of every tooth. Cut as bad as ever and burned worse!

But Allen asked for a good sharpening service, not a bad one. The shop I recommended does work for some of the best custom cabinet and furniture shops in this area. They also do grinding for the machine shop at the company I work for.

Again, I have no personal affiliation with Raymar, but I'd hate to think that the many good local sharpening shops around the country have to suffer because of the reputations of the bad ones.

If in doubt about any such service, you could always check them out by sending them one of your "retired" blades and see what comes back.

Re: Local Saw Blade Sharpening

#6

Re: Local Saw Blade Sharpening

Bruce, a MN Galoot

>I've had extremely good luck with Leitz Tooling. While my nearest one is located only 22 miles from me in MN, they are located nationwide. Last time I was in I brought in my 20+ year old Systimatic combo blade, and it cut better than when it was new.

Bruce

Re: Local Saw Blade Sharpening

#7

Re: Local Saw Blade Sharpening

Tom Stockton

>I prefer to use my local people, the key is to find someone with the skill and correct equiptment our local service has a really sweet computer controllled blade grinder that does a real nice job.

I've had every service I have ever used screw up a blade, these people are the only ones who went out and bought me an exact copy of the blade no questions asked. I had a couple of problems with forrest one dado they sent back that the steel behind the carbide wasn't relieved properly so it rubbed which made for a very unsafe blade another blade they ground out of round so it was kinda shaped like a cam lobe.Forrest fixed the dado and I sent the other blade to my then local shop and he picked up on the problem right away. Forrest was happy to take them back and fix them but I still had to pay for shipping which I felt they should of covered but wouldn't.

So what I'm saying if you find a service you like stick with it a lot of people like forrest and they have a good reputation I just was unlucky and choose to use someone else.

Tom

Re: Local Saw Blade Sharpening

#8

Re: Local Saw Blade Sharpening

ScottS

>I've only used a local sharpening service once, with extremely poor results. A friend of mine did a survey of 6 or 8 local custom cabinet shops to see who they sent blades to. When my blade went dull, I sent it over to the recommended vendor and had them sharpen the blade. Looked great, but only worked well for about a day before it was uselessly dull again.

I think that part of my problem might have been that I dropped the blade of and just told them, "sharpen this". I think I might have had better results if I'd been more specific (e.g. "This blade has an Alternating Top Bevel with a 7-degree hook angle" or whatever). Still, I think the next time I need a blade sharpened I'll be tempted to send it out...

Re: Local Saw Blade Sharpening

#9

Re: Local Saw Blade Sharpening

Glenn Madsen near San Francisco

>My experience is on the other coast, so sending you to Bay Area Carbide wouldn't do you all that much good.

But Doug has been doing this for over 30 years, and bought the business from it's founder ten years ago. His work is great, as are his people, and he takes really good care of his customers. Best place for me to buy or maintain a blade I know of.

Not everyone needs to send stuff away.