Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

To glue or not to glue

Posts

To glue or not to glue

#1

To glue or not to glue

Lee Schierer - McKean, PA

>I'm making a dresser with a bead board panel side. There will be eight 2" wide tongue and groove strips of bead board that make up the panel. They will be confined on the edges in a groove in teh frame. The panel will be 16" wide and about 30" tall. The question is should I glue these strips together to make a single panel or am I better off leaving them as separate strips. The wood is poplar and the panel will eventually be painted a solid color.

Lee

Re: To glue or not to glue

#2

Re: To glue or not to glue

Hal Smith

>I wold not recommend to glue them. Have done similar panels and left them unglued. Hal

Re: To glue or not to glue

#3

Re: To glue or not to glue

Clint Searl, at the base of Haycock Mtn

>Pre paint the individual boards, including the tongues and grooves. Join them loosely enough to accommodate any expansion. and pin each board at the middle into the groove.

Clint

Re: To glue or not to glue

#4

I'd glue them

Rob Sandow

>Paint plus seasonal movement of each piece will quickly equate to the paint coming off at the joints between the bead boards. Pre-paint the panel and make the groove a little wider than needed, then add a liberal coat of wax to the groove before assembly to make sure the paint stays put.