Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

How to make the front of a wine rack

Posts

How to make the front of a wine rack

#1

How to make the front of a wine rack

Steve Silca

>I am going to be building a built-in bar to my Dining Room. Cabinets on the top, a nice thick solid wood countertop, and a wine rack underneath. Does anyone have a good jig or set-up for making a wine rack?

Re: How to make the front of a wine rack

#2

Re: How to make the front of a wine rack

Ernie Miller

>it all depends on the design that you are wanting to use. there are some that are little more than scalops cut in wood so the bottles don't roll to circles cut in the wood that is where a large hole saw would work or come in handy to complicated rows of jointed stock cris crossing that has routed fronts on them. so let us know a little about the design and we will go from there.

Re: How to make the front of a wine rack

#3

Criss Cross style

Steve Silca

>I'm looking to do the criss cross style. I assume the best way is to make a bunch of half lap joints. I'm just wondering if anyone out there has a good jig or set up to make the cuts.

Re: How to make the front of a wine rack

#4

Ya mean like this?

Neal in San Jose

>http://www.van-vliet.org/dempseywoodworking/winerack.shtml

Re: How to make the front of a wine rack

#5

individual holders

Steve Silca

>Actually, I had in mind the type of wine rack where there is an indiviual opening for each bottle. I've seen them before - they're reminiscent of a lattice layout.

Re: How to make the front of a wine rack

#6

Re: Criss Cross style

Ernie Miller

>I under stand make a cross cut sled for your table saw and dado blade, then attach a piece of wood as deep and as wide as the dado on the sled the distance you want the opening to be away from the blade. make first dado then place that dado on the sled so it attaches in the catch cut next dado then next and so on untill you have them all cut. if you use the little notch to register all of the cuts they will all be the same distance apart. I hope you can understand this. if not I will try and draw one up.

Re: How to make the front of a wine rack

#7

Re: Criss Cross style

Steve Silca

>No I've got it. It's basically just an enlarged version of a box joint jig, right? That's what I was thinking of doing, but I was wondering if there were any other tricks out there for this application.

Re: How to make the front of a wine rack

#8

Re: Criss Cross style

Ernie Miller

>I'm sure there are more tricks out there. I can get you an address fro that extra bottle of wine that won't fit.