Outdoor door construction, cedar
Doug Ball
>I'm building a small door for an existing outdoor enclosure made of western red cedar. It's tongue and groove construction with 3 1/2" wide boards. The door will be braced with 6 inch cross pieces. The overall door dimensions are 52" high x 36 wide. Because the cedar is light and soft and doesn't seem to have much nail-holding capability, I was considering gluing the tongue+grooves and screwing on the cross-pieces to the glued panel. The tangential shrinkage of western red cedar is less than the hardwoods we're used to; about 2/3 that of cherry for example. I'm in Maryland so summer humidity is extreme.
Does this plan seem reasonable? Is there a better method for this simple project?
Thanks in advance,
Doug



