Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Blum TandemBox drawers

Posts

Blum TandemBox drawers

#1

Blum TandemBox drawers

Liz H

>We are making our own fronts, but used IKEA kitchen cabinets for most of our new kitchen, mostly because we really like the IKEA branded Blumotion TandemBox drawers. We plan to build some 18" deep tall cabinets with drawers in the bottom, but IKEA's drawers won't work in this depth. I know we can have wooden drawers built that will work just fine here, but I also figure we can assemble the Blum TandemBox drawers just as easily as we did the IKEA brand drawers (several of which we modified to fit our needs.)

Does anyone know of a retailer in the Dallas/Fort Worth area that sells the Blum components? How about an online seller? Does anyone have a general idea of cost? We would be ordering assembled wooden drawers, not making them, so that's the cost we're comparing to.

Re: Blum TandemBox drawers

#2

Re: Blum TandemBox drawers *LINK*

Jim Dillon

>Liz,

One online supplier that carries the Blum product line is Woodworker's Hardware. I have ordered from them in the past and my experience has been excellent. Their catalog is worth getting as well. I have no experience with the TandemBox line of product, but the Blum undermount Tandem slides are superb IMHO, though not inexpensive. Good luck.

Jim


Woodworker's Hardware

Re: Blum TandemBox drawers

#3

Re: Blum TandemBox drawers *LINK*

JackLane

>Hi Liz

Here's the Blum distributors link if you haven't already found it.

The TandemBox drawers are slick, particularly since they've incorporated Blumotion into the slides. I'm tooling up for frameless cabinets in my shop right now and plan to offer the TandemBox as an upgrade. You're smart to pick Blum. IMO, they're the best. We build framed cabinets now and use only Blum hinges.

Rockler and some of the other on-line sources sell Blum products but I'd suggest you call Blum directly to find a distributor in your area. There's a little bit of a learning curve with TandemBox and a local rep can probably help. (That's still ahead for me too). You can also call around to a few cabinet shops in your area until you find one that uses Blum products. I'd start with the commercial shops...According to my distributor, MetaBox and TandemBox tend to be more popular with the commercial shops than with residential cabinet shops. They can put you in contact with the regional sales rep if there's not a distributor close by. If they're using Tandems, they may offer to sell them to you themselves. Good luck and let us know how you make out. All the best.

Jack


Blum Distributors

Re: Blum TandemBox drawers

#4

Re: Blum TandemBox drawers

Liz H

>Thanks Jim. I went ahead and ordered the Woodworkers catalog. I haven't done woodworking in a few decades, but am really enjoying the catalog browsing - it foments all sorts of ideas!

Re: Blum TandemBox drawers

#5

Re: Blum TandemBox drawers

Liz H

>Thanks Jack, I'll make some calls. I know that just reading the TandemBox components list is mind-boggling! It will really help to be able to see them in person, or talk with an experienced person.

I'm glad to read that you're tooling up for frameless production. I know that homeowners are realizing how much more efficient the frameless cabs are. It's a frequent topic of discussion on kitchen remodeling boards.

Re: Blum TandemBox drawers

#6

Re: Blum TandemBox drawers

Liz H

>Jack - I've found a local retailer, so that's no longer a concern. I'll report back in a month or 2 when we do a cost comparison on premade wooden drawers vs. the TandemBox.

Re: Blum TandemBox drawers

#7

Re: Blum TandemBox drawers

JackLane

>Liz,

Have you considered making your own drawers? In my shop we offer three different styles: 3/4" dovetailed that we do ourselves either out of maple or poplar; 1/2" Baltic birch (outsourced); and 3/4" prefinished plywood that we pocket screw together and edgeband. We buy the plywood prefinished on both sides and use regular pre-glued edgebanding to cover the raw edges. My customers pick the prefished plywood drawers 90% of the time. I've found that they could care less about drawer construction. They go for the look...they really are beautiful drawers. The screws are hidden behind the drawer front and in back resulting no visible fasteners. I also use 1/2" bottoms. For the most part, that's overkill but it helps me use the 1/2" drop-offs. On the other hand, more and more people are choosing deep drawers over pull-outs. A thicker bottom on those deep drawers is a must IMO.

I outsourced all my drawers for years but the various suppliers I used all gradually lost control of their quality standards. I've seen them vary by 3/16". When I switched to full extension slides, I had to stop outsourcing because the tolerances with those slides are just too close. If you order out, don't be surprised if you have to fiddle with the drawers to get them to fit. If you use Tandems they should be a little more foregiving. Sorry for rambling :-) Good luck.

Jack