Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

WC Weekend Accomplishments.....

Posts

WC Weekend Accomplishments.....

#1

WC Weekend Accomplishments.....

Dennis E. Peacock

>Good Morning Everyone,

I hope this finds each of you doing well and that your shops have the appearance of "someone's been working in my shop".

Let's see....I've been working on the dresser / changing table for our friends and I'm getting close on it of being done. I have all seven drawer boxes done, dovetails on all corner joints, I have almost all the face-frame mounted, then all I need to do is to build up the interior of the carcase enough to mount the ball-bearing drawer-slides to, cut and mount the drawer fronts, mount the drawer slides, and finally add the skirting on the bottom for the feet and bottom design. Then toss on the top of the dresser and it'll be ready for delivery. I guess I should say that all I like is the rest of it, hugh?

I haven't picked up working on the kitchen table project for some time now. I need to get it back under way, get it done and get it out of my shop.

It was church Sunday, had music rehearsal Sunday afternoon in preparation for next Sunday's music. With all this music in mind reminds me that I have started a new course on bass guitar in hopes of it helping me to get better. It seems that I'm never satisfied with my playing skills and keep striving for more and better ways and skills to improve my playing. Does it ever end?

So what did YOU do this weekend?

Best of weeks to you all.

Dennis

Re: WC Weekend Accomplishments.....

#2

Re: WC Weekend Accomplishments.....

George@Colonel's Workshop-Havertown PA

>Good Morning Dennis, and a Happy Monday

My shop weekend wasn't very dissimilar to your own. I spent most of the time fabricating the drawer faces for our new night stands. Each of the full inset drawer faces are 1/2" thick and wrapped by a 3/4" wide, 1/4" thick mitered bead. Thus the drawer fronts are slightly recessed within the cabinet face frame. I got a near piston fit which can be sweetened by a Lee Valley LA block plane. There are 4 drawers per unit, so all that mitering and fuss must be repeated on the second cabinet. We had several kids and grandkids over for the family party last night and thoroughly enjoyed ourselves. Have a great week.

Re: WC Weekend Accomplishments.....

#3

Power At Last!

Hank Knight from SC

>I've been shuffling 220V extension cords around my shop for years. I designed the power layout 15 years ago, but I've added machines and rearranged the shop half dozen times since then. As a result, I've not had sufficeint 220V outlets for my needs and the ones I had were all in the wrong places. Moreover, the 120V outlet for my Inca jointer planer tripped the breaker every time I turned on the machine.

Fellow woodworker and Islander, Ray Binnicker, suggested I call his brother-in-law for help. I did and this weekend we put in a new 100A subpanel with 4 new 220V circuits for the lathe, table saw, bandsaw and dust collecter and a new 120V circuit for the jointer/planer. He did a great job and I am now the proud owner of a fully electrified workshop. No more dragging extension cords around!

Re: WC Weekend Accomplishments.....

#4

Re: WC Weekend Accomplishments.....

John Veerkamp

>We drove back from 3 weeks in Texas. Visited Curley Woods in McKinney on the way home and picked up some curley maple and Mesquite for turning. And most important our broken Computer was fixed while we were gone and now after 5 weeks I can again get back into WC and chats. Good to be home again.

Re: WC Weekend Accomplishments.....

#5

Re: WC Weekend Accomplishments.....

David Hay @ Denver

>I didn't spend a whole lot of time in the shop this weekend. However, I did spend some time installing some various pieces of trim that have been missing from our house for some time.

Have a great week!

David