Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

OT, Wheel barrow troubles?

Posts

OT, Wheel barrow troubles?

#1

OT, Wheel barrow troubles?

Barry Irby

>I had an old heavy duty construction wheel barrow that finally went to where ever old faithful wheel barrow go when they no longer barrow. I bought one of those big ones (5 or 6 CF) from the Borg that has a plastic (polypropylene?) body. Thought it would be good and not rust, etc. It was fine on light duty stuff like leafs until I put a large potted tree in it.

It was like having two sticks attached to a small hunk of rubber. The handles went in every direction, or at least it seemed that way. No rigidity and little coordination between them. A wild ride.

Two things. Is this the way they are or have I not assembled mine incorrectly? The bracing between the struts just slips into slots and seemed real loose. It never occurred to me how much strength the bucket added to the whole thing.

And, if this is what they do, don't buy one for heavy duty work. Save your pennies and buy a "real" wheel barrow.

Re: OT, Wheel barrow troubles?

#2

Re: OT, Wheel barrow troubles?

Al Stokka - Cambridge, Iowa

>Barry,

I haven't looked at plastic wheel barrows, beyond noticing them displayed, since I take good care of my equipment (unlike others,apparently, whose name I won't mention) ;^), but...

It seems to me that the stiffness would be provided by the undercarriage, not the material container. Without the container attached, there should be no flex in the undercarriage. Most have X-bracing between the handles and also between the legs.

Al

Re: OT, Wheel barrow troubles?

#3

Re: OT, Wheel barrow troubles?

John in Kerrville

>Barry, I would at least go have another look at their display models, that much flex seems odd. I just buy old used metal ones and rehab them.

Re: OT, Wheel barrow troubles?

#4

What I did to fix this...

Mike in Paradise

>I have two wheel barrows..The first was a plastic one. What I did to stop the flex was to take some 2 inch angle iron and reinforce between the the two handles where the bolts hold the tub onto the handles. You can kinda sorta see it in this picture

I actually use it a lot as it is so much lighter than my other heavy metal one.

Ah who am I kidding I use them both a lot (when and if the snow goes away) and if I had a third I would use it too...


img

Re: OT, Wheel barrow troubles?

#5

Find a contractor supply outlet....

SanMan

>....it will be more $$$ up front, but you likely wont have these wheel barrow problems as the construction industry end users beat 'em up pretty good.

SM

Re: OT, Wheel barrow troubles?

#6

Re: OT, Wheel barrow troubles?

Barry Irby

>Al, Al, Al, you talken to ME? The wheel barrow that died was thirty five years old. I took as good care of it as it took of me. When I was in commercial construction we used to buy them and immediately throw the tire away and put a REAL tire on the them. Even on the really heavy duty ones, the tire that came on them would not last a day.

So, Now I'm a little older than when I bought that last one and I figured I could lighten up a bit and use one of the new fangled plastic ones. NOT

It is beginning to bother me that many of my tools are aging along with me. The Internet did not exist when I bought most of them.

Re: OT, Wheel barrow troubles?

#7

Re: OT, Wheel barrow troubles?

Al Stokka - Cambridge, Iowa

>Barry,

I don't like one upsmanship, but your excuse is so lame that I can't help it...

My wheel barrow is at least 50 years old. It belonged to my father and, I'm happy to say, it's now mine. I couldn't begin to calculate the yards of concrete that have been mixed in that critter. Also hauled tons (yes, tons) of broken concrete for retaining wall cnstruction. The only poor care it received, due to one of his errant sons, I'm sure, was the time concrete leftovers were allowed to harden in the steel tray. I'm sure either I or my brother caught heck for it. Over the years, most of the concrete has worn off, but there is enough remaining to serve as a reminder to it's new owner to take care of it.

Enjoying harassing Barry from Iowa,

Al

Re: OT, Wheel barrow troubles?

#8

Re: OT, Wheel barrow troubles?

Barry Irby

>Al, My old wheel barrow thought it was descended from the space shuttle.

One day I was riding down the road at about sixty miles and hour. Looked in the mirror and noticed the wheel barrow was flying in formation with me. I turned around and went back to get it only to find a cop standing there with it. I was expecting it to be a pile of junk. Apparently it executed a perfect air cushion landing upside down with the wheel up and in the front. The handles had little flat spots ground onto them and there were very slight scratches on the rim. In stead of the cop giving me a ticket for littering or worse, he helped me load it back up.

Actually, it was my sons who finished it off. My sons were rougher on it than you and your brother were on your dads.

Re: OT, Wheel barrow troubles?

#9

Two wheels

Tom Dunlap

>After talking with some landscaper buddies I know that my next 'barrow will have two wheels. they don't maneuver quite as easy but still easy enough. AND...no more back straining tipping action.

Tom

Re: OT, Wheel barrow troubles?

#10

Re: Two wheels

Glenn Madsen near San Francisco

>I have a two wheeled garden cart, a farm cart, really, that I bought from the feed store. It does a good job on gardening loads, but the blue-painted, construction grade, heavy duty wheelbarrow that I bought about ten years ago was a really good purchase.

The two wheeler runs fine, but you can't balance a heavy load in it and steer, like I can with the other. Of course, my dad taught me to drive the old style, pouring concrete and laying brick and block.

Gotta have both! Nowadays, so the boys can run the heavy duty critter.

Re: OT, Wheel barrow troubles?

#11

Odd man out here

Gary Camp, Bend, Oregon

>I like my plastic double wheeler, it is plenty stiff enough, even with 400 lbs of pellets in it. If it wasn't I'd probably pull the tub and put a piece of 1/2" plywood down and put the tub back on. I bought plastic because I could get a 10 cubic footer, hay, before or after it's been through the horses ain't that heavy, and bigger means less trips. 2 wheels lets you "drive with one hand and open and close gates / hot wires with the other

glc

Re: OT, Wheel barrow troubles?

#12

Re: What I did to fix this...

Ernie Miller

>that don't look like Paradice to me! building a road the old school. one shovel full at a time. I can rember digging a pond at my parrents farm as a kid with a shovel and wheel barrow. not a big one maybe 80'X150' there was some sloap and all but that dam was all dirt and rock. dig a trinch fill it back throw the dirt forward and fill it back in with dirt from where you wanted the pond to be deeper. we used some telephone poles to make a rope swing. I guess you have to work hard to play hard.