Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Super Dado

Posts

Super Dado

#1

Super Dado

Ells in Boulder

>I recently upgraded from an old adjustable dado blade to Freud Super Dado set to get sharper and smoother cuts. I was disappointed to find that there is enough looseness in the chippers' center holes (dia. slightly too large) so as to give very a uneven bottom in the dado cut, no better than the old Craftsman adjustable. Did I get a bad set of chippers? The main, end, blades fit fine.

Ells

Re: Super Dado

#2

Do you have a caliper mic?

John in New Mexico

>If the holes in the chippers mic bigger than the holes in the blades, then you've got bad chippers. Otherwise, you may have a worn arbor, or it may just be variation in the dado set, though I'd expect somewhat better from this manufacturer.

John

Re: Super Dado

#3

Re: Do you have a caliper mic? -solved

Ells in Boulder

>After posting, I thought about mic'ing the holes (got a new digital for Xmas) and noticed a slight suggestion of only 0.002-.004" oversize on the chippers. Rechecked the end blade and it too came in about the same. Then I looked closer at the arbor and there it is, there is a shoulder that the blade usually sets on, and the first dado. Rest is thread that is slightly smaller. Need some sort of sleeve.

Ells

Re: Super Dado

#4

What saw?

Hoa Dinh

>The problem with the variation in arbor diameter is a known defect of some Craftsman saws made by Emerson.

Some of the early Ridgid saws also have this problem.

If you saw is a Ridgid, contact them. I've heard that they send out replacement arbors free of charge.

If it is a Craftsman, you're on your own. I've heard that it could be fixed with epoxy.

-- Hoa

Re: Super Dado

#5

Re: Do you have a caliper mic? -solved

Charles M

>The tolerance on Freud 5/8" bore dimensions is 0.625" +0.0007"/-0.0000". The result is that the hole will be no smaller than 0.6250" and no larger than 0.6257". I would wager that the saw is either a Craftsman or Ridgid - both are known to have arbors as you described.

Re: Super Dado

#6

Re: What saw?

Ells in Boulder

>It's an old Craftsman (25-years) that has served me very well, up to this. S. Dado is worth more than the saw. I guess I know my next move!

Ells