Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Dumb baltic birch question

Posts

Dumb baltic birch question

#1

Dumb baltic birch question

Dave LaPine

>I have a nice set of plans to build a sled for my tablesaw that requires a 5'x5' sheet of baltic birch plywood. I was wondering why they make 5'x5'. I assume 4'x8' is also available? Is it because they're used for cabinet building?

Re: Dumb baltic birch question

#2

it's metric

Warren Muse, Earlysville VA

>Made in Europe.

Actually 60 cm by 60 cm.

Almost by definition, anything 4' x 8' isn't Baltic Birch.

Re: Dumb baltic birch question

#3

correction

Warren Muse, Earlysville VA

>actually 150 cm square

Re: Dumb baltic birch question

#4

I'm not even metric literate…

Rod Peterson -- Ormond Beach

>…but I thought I calculated out once that 5'x5' was about 1.5x1.5 meters. 60cm is only about 24", I think. Let's see—a Delta DJ30 is a 12" jointer (c'mon, you knew the DJ15, DJ20, and DJ30 were based on table widths in cm, didn't you?)—so 60cm is about 24". Where's that DJ60 I've been lusting after?

Rod

Re: Dumb baltic birch question

#5

Beat me by three minutes.______

Rod Peterson -- Ormond Beach

>

Re: Dumb baltic birch question

#6

Thanks- now I'm less dumb.

Dave LaPine

>

Re: Dumb baltic birch question

#7

Dave would you be in LaPine, Oregon?

Gary Camp - Bend, Oregon

>

Re: Dumb baltic birch question

#8

Re: Thanks- now I'm less dumb.

Keith Newton

>Dave there is a relatively new 4 x 8 product on the market now sold as China Birch which has a similar core as far as number of plys.

There is an even better American made line of sheet goods marketed as Apple Ply. If you can find a dealer near you, you will like the product.

Re: Dumb baltic birch question

#9

Umm . . . 150cm is only 59.055 inches

Henry Higginbotham

>What I have on hand is technically "Russian" birch, not Baltic, but it measures just over 60 inches. Does genuine Baltic measure only 59 inches?

Re: Dumb baltic birch question

#10

Excellent Question, Henry !

Robert Hutchins

>Never used BB myself but have been in the planning stages for some pull outs for HL's base cabinets in the kitchen. Was planning to use BB based on my understanding that it's 60"x60" - which I kalk-you-late as being under that. Did a wiki lookup and found nothing. Google shows some sales sites but they don't show size as other than 60x60.

Wish somebody who has some of this stuff would put a tape on it an tell us the exact dimensions.

Re: Dumb baltic birch question

#11

Re: Another Answer, Bob,

Carol from AZ

>Exact size will depend on your vendor and their source. I've had both over and under.

BTW, the Chinese stuff has voids. Personal experience. Surprised the dickens out of me. Also, p...sed me off!

I found the Apple ply beautiful but pricey. I compared the price by square foot.

Re: Dumb baltic birch question

#12

Re: Excellent Question, Henry !

Henry Higginbotham

>All I have on hand now, and all Russian birch I've ever seen in full sheets, was 60x60. I may be mistaken, but I always assumed that Baltic birch was the somewhat nicer stuff that some of the Incra fences and other parts were (are?) made of. It had some sort of red coating, maybe had 15 plies instead of 13, and just generally looked better. Seems like Woodpeckers used to sell it at the shows, but only in smaller pieces. I'm afraid that IF I could find it, it would be a lot pricier than the Russian.

What I've seen of the Chinese birch product someone else mentioned, while good value, is not remotely in the same class as the Russian. It's considerably lighter weight by volume, has thinner, sometimes poorly glued-on face veneers, and usually has more voids.

Re: Dumb baltic birch question

#13

Re: Menards question

Larry Clinton At Frankfort (Central)., Indiana

>I was at the Borg Tuesday (Menards) and they are selling 4 X 8 sheets labeled "Baltic Birch" for $60 ~ $70. Try as I might, I could not find a stamp or label with Country of origin. I did not count the plys but it had at least 15. Didn't see any voids on the edges of the several sheets in the rack. I wasn't interested in buying any but am curious - is this the Chinese material?? I have purchased 5 X 5 sheets of Baltic and Russian birch before. Actually felt the Russian was a little more stable in the lots I purchased.

Re: Dumb baltic birch question

#14

Thanks to Both! I'll Take a Tape Along to Austin

Robert Hutchins

>

Re: Dumb baltic birch question

#15

NO! Big Differences

Garrett in Victoria BC

>I've used a lot of China Birch recently, and it is an entirely different product.

The good news: China birch is far less expensive than Baltic Birch, and is also available with a "mahogany" face veneer. (Not sure what it actually is, but it looks and works much like luan.)

The not-so-good news: CB has minor voids whereas BB does not. The CB lay-up is not nearly so good as BB - there can be minor internal delam in places, but not enough to compromise structural strength - and the face veneers are thinner. On a couple of the panels I bought, the face veneer was ragged along one long edge. Face colour is quite inconsistent with shades of brown in some areas. It's also not nearly so stable as BB, needs care in storage, and warps, although once locked in as a component of something larger, it's fine. Do NOT use it for cupboard doors. (DAMHIKT!) And finally, it comes as a 4 x 8 x 11/16 panel,

Cheers, Garrett

Re: Dumb baltic birch question

#16

Different from what?

John in New Mexico

>Apple ply or baltic birch?

Sounds to me like CB's only advantage is cheep.

I think I'll stick to russian birch ply, $20 a sheet won't break the bank.

John

Re: Dumb baltic birch question

#17

Now, John, depends on whose bank.

Don Henthorn

>

Re: Dumb baltic birch question

#18

Re: Dave would you be in LaPine, Oregon?

Dave LaPine

>No Gary, I'm in Washington but I wonder if I could get any special treatment if I went?.....